Intel pentium j6425 & celeron j6413 & celeron n6211 & atom x6413e mini-itx hdmi/dp/lvds or edp, 6 x com, and dual lan, 8 x usb, 1 x m.2 b key, 1 x m.2 e key, and pcie x1 (4 pages)
Mobile amd g-series quad core mini-itx with dvi-i/ lvds/display port/edp, 5com and dual lan (102 pages)
Summary of Contents for Advantech AIMB-216
Page 1
User Manual AIMB-216 AIMB-216 Intel® Pentium N3710 & Celeron N3160/N3010 Mini-ITX DVI-D/HDMI (or LVDS)/DP (or eDP), 6 COM, and Dual LAN, 6 USB, 1 MiniPCIe and 1 M.2 B key, PCIe x1...
Page 2
No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
Page 3
Our dealers are well trained and ready to provide the sup- port required for you to experience the most from your Advantech products. Most of the problems reported are minor and can be easily solved over the phone.
Page 4
Caution! There is a risk of a new battery exploding if incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the manufac- turer. Discard used batteries according to the manufacturer's instruc- tions. AIMB-216 User Manual...
Page 6
Because of Advantech’s high quality-control standards and rigorous testing, most of our customers never need to use our repair service. If an Advantech product is defec- tive, it will be repaired or replaced at no charge during the warranty period. For out- of-warranty repairs, you will be billed according to the cost of replacement materials, service time and freight.
Page 7
All AIMB-216 devices are mechanically and electrically inspected before shipment. Thus, your product should be free of marks and scratches and in perfect working order upon receipt. While unpacking AIMB-216, check the product for signs of shipping damage (for example, a damaged box, scratches, dents, etc.).
Page 10
Introduction ..................... 38 BIOS Setup ..................... 38 3.2.1 Main Menu .................. 39 3.2.2 Advanced BIOS Features ............40 3.2.3 Chipset..................61 3.2.4 Security..................71 3.2.5 Boot .................... 73 3.2.6 Save and Exit................74 Chapter Software and Service Introduction. 75 AIMB-216 User Manual...
N3010 dual-core 1.04 GHz CPU with DDR3L 1600 MHz of up to 8 GB. The AIMB-216 offers rich I/O connectivity with four USB 3.0 and six USB 2.0 ports (USB78910 is an optional BOM), as well as six COM ports integrated in a standard 170 x 170 mm form factor.
1.3.2 Memory RAM: 2 x SO-DIMM DDR3L 1600 MHz up to 8 GB Note! AIMB-216 supports 1.35 V memory only. Users must install the memory module on the DIMM1 socket first. 1.3.3 Input/Output PCI bus: One PCIe x1 slot, one full size MiniPCIe and one M.2 2242 & 2280 (B key) socket ...
Jumpers and Connectors The AIMB-216 motherboard is equipped with connectors for linking the board to external devices such as hard disk drives and a keyboard. The board also features several jumpers for configuring the system according to specific applications. The function of each board jumper and connector is listed in the table below. The pro- cedure for setting jumpers is explained in subsequent sections of this chapter.
Page 17
Power LED and keyboard lock pin header JFP3 Power switch/HDD LED/ SMBus/Speaker pin header JFP1+JFP2 LVDS2 control signal pin header (optional) LVDS2 eDP & LVDS2 Backlight inverter power connect or INV2 (optional) ATX 12V power supply connector ATX12V1 RS-485/RS-422 terminal resistor jumper SW_422_1 AIMB-216 User Manual...
Caution! There is a danger of a new battery exploding if incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the man- ufacturer. Discard used batteries according to the manufacturer’s instructions. AIMB-216 User Manual...
1.8.2 CMOS Mode Selection (JCMOS1) The AIMB-216 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. This jumper is typically set with Pins 1 and 2 being closed. To reset the CMOS data, set J1 to Pins 2 and 3 as closed for a few seconds before moving the jumper back to Pins 1 and 2 as closed.
Set the LVDS panel as +12 V (3-4) 1.8.5 PSON1: ATX and AT Mode Selector Table 1.6: PSON1: ATX and AT Mode Selector Closed Pins Result AT Mode 2-3* ATX Mode *Default AT Mode ATX Mode 1-2 closed 2-3 closed AIMB-216 User Manual...
Case Open Pin Header Selection (JCASEOP_SW1) Table 1.8: Case Open Pin Header (JCASEOP_SW1) Function Settings Normal Close Normal Open (default) 1.8.8 Power Switch/HDD LED/SMBus/Speaker (JFP1 + JFP2) Table 1.9: Power Switch/HDD LED/SMBus/Speaker (JFP1 + JFP2) Function Settings JFP1 (7-10) (default) AIMB-216 User Manual...
Set the EDP panel as +12 V (3-4) 1.8.10 JEIDA/VESA Selection (VCON1) Table 1.11: JEIDA/VESA Selection (VCON1) Function Settings Pull high to +3.3V (default) (JEIDA or VESA base on panel definition) Pull down to GND (JEIDA or VESA base on panel definition) AIMB-216 User Manual...
Function Settings Default Add RS-485 terminator Add RS-422 terminator 1.8.12 COM6 5V/12V selection (JSETCOM6_V1) Table 1.13: COM6 5V/12V Table 1.14: selection (JSETCOM6_V1) Function Settings Set COM6_RI# as Ring (Default) Set COM6_RI# as 5V Set COM6_RI# as 12V AIMB-216 User Manual...
Table 1.15: LVDS1 backlight control (JVBR1) Function Setting DC mode (1-2) PWM mode (2-3) (Default) 1.8.14 eDP and LVDS2 backlight control (JVBR2) Table 1.16: LVDS1 backlight control (JVBR2) Function Setting DC mode (1-2) PWM mode (2-3) (Default) AIMB-216 User Manual...
GND for normal SATA connector (2-3) (Default) 1.8.16 Power LED and PS2 keyboard control (JFP3) Table 1.18: Power LED and PS2 keyboard control (JFP3) Function Setting 1-3: For power LED (Pin1: Anode, Pin3: Cathode) 4-5: Enable PS2 keyboard AIMB-216 User Manual...
LAN and USB Ports AIMB-216 provides up to four USB 3.0 and six USB 2.0 ports. Four USB 3.0 are located on the rear side, and six USB 2.0 are located internally. The USB interface complies with the USB specification revision 2.0 that supports transmission rates of...
DVI-D Connector (DVI_1) Serial Ports (COM1 ~ COM6) AIMB-216 supports six serial ports. COM3 is RS-232/422/485 and COM1/2/4/5/6 are RS-232. COM6 also supports 5 V/12V according to jumper selection. Users can employ JSETCOM3 to select between the RS-232/422/485 modes for COM3. Such ports can be connected to serial devices, such as a mouse or printer, or to a commu- nications network.
Users who experience problems with a serial device are advised check the connector pin assignments. PS/2 Keyboard and Mouse Connector (KBMS1) Onboard six-pin wafer box connector, which supports one standard PS/2 keyboard and one standard PS/2 mouse. Display Port Connector (DP1) AIMB-216 User Manual...
HDMI connector (HDMI1) CPU and System FAN Connector (CPU1 and SYSFAN1) SYSFAN1 CPUFAN1 For devices with a fan installed, this connector supports cooling fans of up to 500 mA (6 W). AIMB-216 User Manual...
External Speaker (JFP1 + JFP2/SPEAKER) (JFP1 + JFP2/SPEAKER) is a four-pin connector for an external speaker. If no exter- nal speaker is available, the AIMB-216 provides an onboard buzzer as an alternative. To enable the buzzer, set Pins 7-10 as closed.
Connect Pins 1 and 2 to Pins 2-3 closed Pins 1-2 closed plane) jumper setting the panel switch via cable System On Fast flashing Slow flashing System Off 2.10 Line-Out Connector (AUDIO1) This connector supports line-out, mic-in, and line-in functions. (Default: line-out) AIMB-216 User Manual...
Serial ATA Interface (SATA1/2) & SATADOM Power Pin Header (JSATAPWR1) SATADOM power pin header (JSATAPWR1) JSATAPWR1:For SATA1 support DOM 1‐2:+5V for DOM 2‐3:GND for Normal SATA connector (DEFAULT:2‐3) This connector supports line-out, mic-in, and line-in functions. (Default: line-out) 2.12 PCI-Express x1 Slot (PCIEX1_1) AIMB-216 features one PCIe x1 slot. AIMB-216 User Manual...
This connector is for an ATX Micro-Fit power supply. The plugs from the power sup- ply are designed to fit these connectors in only one direction. Determine the correct orientation and press firmly until the connectors mate completely. AIMB-216 User Manual...
2.15 SPI Flash Connector(SPI1_1) The SPI flash card pin header may be used to flash the BIOS if the AIMB-216 cannot be powered on. 2.16 LVDS Backlight Inverter Power Connector (INV1) Note! Signal Description Signal Description Signal Vadj=0.75 V (Recommended: 4.7 K Ω...
2.26 DDR3L SODIMM Socket (DIMM1/2) Note! AIMB-216 supports 1.35 V memory only. Users must populate the mem- ory on socket DIMM1 first. Users are advised to use memory modules of the same type, speed, and frequency for each motherboard. Memory modules of different types and speeds should not be used.
2.31 eDP & LVDS2 Backlight Inverter Power (INV2), (BOM option) 2.32 LVDS2 Control Signal (LVDS2), (BOM option) Note! AIMB-216 can support 2nd LVDS function via AIMB-LVDS2-00A1E. It requires customized BIOS and AIMB-216 BOM change. AIMB-216 User Manual...
AIMB-216 BIOS setup menu pages. BIOS Setup The AIMB-216 Series is equipped with built-in AMI BIOS and a CMOS Setup Utility that allows users to configure specific settings or activate certain system features. The CMOS Setup Utility saves the configuration in the CMOS RAM of the mother- board.
System Date using the <Arrow> keys. Enter new values via the keyboard. Press the <Tab> or <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. AIMB-216 User Manual...
3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-216 Setup menu to enter the Advanced BIOS Setup page. Users can select any item in the left frame of the screen, such as CPU Configuration, to access the submenu for that item. Select an Advanced BIOS Setup option by highlighting the text using the <Arrow>...
Page 53
3.2.2.1 Realtek PCie GBE Family Controller AIMB-216 User Manual...
Page 54
3.2.2.2 Trusted Computing Security Device Support To enable or disable BIOS support for security device support. AIMB-216 User Manual...
Page 55
Enable Hibernation This item allows users to enable or disable hibernation. ACPI Sleep State This item allows users to set the ACPI sleep state. Lock Legacy Resources This item allows users to lock legacy device resources. AIMB-216 User Manual...
Page 56
3.2.2.4 Super IO Configuration AIMB-216 User Manual...
Page 59
Serial Ports 1/2/3/4/5/6 This item allows users to enable or disable serial Ports 1/2/3/4/5/6. Change Settings This item allows users to change the settings for serial Ports 1/2/3/4/5/6. AIMB-216 User Manual...
Page 60
3.2.2.5 PC Health Status This page shows the PC health status of AIMB-216. Smart Fan Function This item allows users to enable or disable the System Smart Fan function. CPU Warning Temperature This item allows users to set the CPU warning temperature threshold. When the system CPU reaches the warning temperature, the buzzer will beep.
Page 61
3.2.2.6 Smart Fan Mode Configuration This page shows the Smart Fan Mode items. 3.2.2.7 Digital I/O Configuration Digital I/O Configuration This item allows users to set digital I/O 1 to 8 as inputs or outputs. AIMB-216 User Manual...
Page 62
S5 RTC Wake Settings Wake System From S5 This item allows users to enable or disable system wake on alarm event. 3.2.2.9 Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection. AIMB-216 User Manual...
Page 63
This item allows users to enable or disable Bi-directional PROCHOT. Intel Virtualization Technology This item allows users to enable or disable Intel® Virtualization Technology. Power Technology This feature allows the user to configure power management settings. The options are Disabled, Energy Efficiency, and Custom. AIMB-216 User Manual...
Page 64
This page shows the CPU information. 3.2.2.11 CPU Thermal Configuration Enable or disable the Digital Thermal Sensor. AIMB-216 User Manual...
Page 65
This item allows users to enable or disabled CPU C state report to OS. Max CPU C-state This option controls Max C state that the processor will support. S0ix This item allows users to enable or disable the CPU S0ix state. AIMB-216 User Manual...
Page 66
This item allows users to enable or disable the Serial-ATA Port 2 device Spin Up Device This item allows users to enable or disable the Spin Up Device. Device Sleep Support This item allows users to enable or disable Device Sleep support. AIMB-216 User Manual...
Page 67
HDD Unlock To enable or disable HDD Unlock. If enabled, it indicates that the HDD pass- word unlock in the OS is enabled. LED Locate To enable or disable LED Locate. AIMB-216 User Manual...
Page 68
3.2.2.14 Miscellaneous Configuration OS Selection This item allows users to select the OS as Windows 7 or Windows 8.x for use. 3.2.2.15 Network Stack Configuration Network Stack Enable or disable UEFI Network Stack. AIMB-216 User Manual...
Page 69
Controls the execution of UEFI and Legacy Storage OpROM. – Video Controls the execution of UEFI and Legacy Video OpROM. – Other PCI devices Determines the OpROM execution policy for devices other than network, storage, and/or video devices. AIMB-216 User Manual...
Page 70
3.2.2.17 NVMe controller and Drive information 3.2.2.18 USB Configuration AIMB-216 User Manual...
Page 71
Maximum time the device will take before it properly report itself to the host con- troller. Mass Storage Device Mass storage device emulation type. 'AUTO' enumerates devices according to their media format. Optical drives are emulated as 'CDROM', drives with no media will be emulated according to a drive type. AIMB-216 User Manual...
Page 72
TXE HMRFPO This item allows users to enable or disable TXE HMRFPO. TXE Firmware Update This item allows users to enable or disable TXE firmware updates. TXE EOP Message Send EOP message before entering the OS. AIMB-216 User Manual...
3.2.3 Chipset This page provides information of the chipset on AIMB-216. 3.2.3.1 North Bridge Max TOLUD This item allows users to select the maximum value of TOLUD. AIMB-216 User Manual...
Page 74
Enable or disable PR3 (For Win 10 only). DVMT Pre-Allocated Select DVMT 5.0 Pre-Allocated (Fixed) graphics memory size used by the Internal Graphics Device. DVMT Total Gfx Mem Select DVMT 5.0 Total graphic memory size used by the internal graphics device. AIMB-216 User Manual...
Page 75
ISP Enable/Disable Enable or disable ISP PCI device selection. 3.2.3.3 Graphics Power Management Control RC6 (Render Standby) This item allows users to enable render standby support. Power Meter Lock Enable or disable Power Meter Lock. AIMB-216 User Manual...
Page 76
3.2.3.4 Memory Configuration Options MRC Fast Boot Enable or disable MRC Fast Boot. Forces MRC training to occur when disable. 3.2.3.5 LCD Control LVDS Panel Type LVDS Panel Type selection. AIMB-216 User Manual...
Page 77
This item allows users to select off, on and last state. SATA Port2/M.2 Select SATA Port2 or M.2 to be used. PCIE Slot/Mini PCIE Select PCIE Slot or Mini PCIE to be used. PCIE Device Initial Delay The PCIE device initial delay time select. AIMB-216 User Manual...
Page 78
RTC Lock Enable or disable bytes 38h-3Fh in the upper and lower 128-byte bank of RTC RAM lockdown. BIOS Lock Enable/Disable the BIOS Lock Enable feature. Global SMI Lock Enable or disable SMI Lock. AIMB-216 User Manual...
Page 79
3.2.3.8 Audio Configuration Audio Controller Control Detection of the Azalia device. Disabled = Azalia will be unconditionally disabled. Enabled= Azalia will be unconditionally Enabled. AIMB-216 User Manual...
Page 80
Configure PCIe Speed. CHV A1 always with Gen1 Speed. Detect Non-Compliance Device Detects non compliant PCI Express devices. If enabled, it will take more time during POST. L1 Substates PCI Express L1 Substates settings. AIMB-216 User Manual...
Page 81
PCIe Speed Configure PCIe Speed. CHV A1 always with Gen1 Speed. Detect Non-Compliance Device Detects non compliant PCI Express devices. If enabled, it will take more time during POST. L1 Substates PCI Express L1 substates settings. AIMB-216 User Manual...
Page 82
Native PCIE Enable PCI Express Native Support Enable/Disable. This feature is only available in Vista. AIMB-216 User Manual...
3.2.4 Security Select Security Setup from the AIMB-216 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press<Enter>: Change Administrator / User Password.
Page 84
1. The system is running in user mode with enrolled platform key (PK) 2. The CSM function is disabled. Secure Boot Mode Secure Boot mode selector. “Custom” Mode enables users to change Image Execution policy and manage Secure Boot Keys. AIMB-216 User Manual...
Setup Prompt Timeout This item allows you to change number of seconds to wait for setup activation key. Bootup NumLock State Selects the keyboard Numlock state. Quiet Boot Enable or disable Quiet Boot option. AIMB-216 User Manual...
Launch EFI Shell From a File system Device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. Reset System with ME disable Mode ME will runs into the temporary disable mode, Ignore if ME Ignition FW. AIMB-216 User Manual...
Page 88
Introduction The mission of Advantech Embedded Software Services is to “enhance users’ quality of life with Advantech platforms and Microsoft® Windows® embedded technology”. We equip Advantech platforms with Windows® embedded software products to more effectively support the embedded computing community. This eliminates the hassle of dealing with multiple vendors (hardware suppliers, system integrators, and embed- ded OS distributors) for specific projects.
Page 89
CPU speed according to the system load. System Throttling This refers to a series of methods for reducing system power consumption by lowering the clock frequency. This API allows users to adjust the clock frequency from 87.5% to 12.5%. AIMB-216 User Manual...
Page 90
The Monitoring API is a utility that allows users to monitor the system health indicators, such as voltage, CPU and system temperature, and fan speed. These system values are crucial. If critical errors occur and are not solved imme- diately, permanent damage to the device may result. AIMB-216 User Manual...
Page 92
Before Installation Before installing the enhanced display drivers and utility software, please read the instructions provided in this chapter carefully. The drivers for AIMB-216 are provided on Advantech support website: http://support.advantech.com/Support/. This driver will guide and link users to the utilities and drivers required for Microsoft Windows- based systems.
Page 94
See Chapter 5 for information regarding installing the CSI utility. Download the driver from website on your computer. Navigate to the "Graphics" folder and click "setup.exe" to complete the installation of the drivers for Windows 7, Windows 8.1 and Windows 10. AIMB-216 User Manual...
Page 96
Introduction The AIMB-216 system features dual Gigabit Ethernet LANs via dedicated PCI Express x1 lanes (Realtek RTL8111G (LAN1) and Realtek RTL8111G (LAN2)) that offer a bandwidth of up to 500 MB/sec, eliminating bottlenecks in the flow of network data by incorporating Gigabit Ethernet at 1000 Mbps.
Page 97
Chapter XHCI Driver Installation for USB Setup...
Page 98
If your OS is Win 7, you need to install a USB 3.0 driver manually first. Download USB 3.0 driver from website to your computer. Click “USB 3.0” folder and chose WIN7 or WIN8.1 for the driver installation. Follow the instructions. AIMB-216 User Manual...
Page 99
Appendix Programming the Watchdog Timer...
Page 100
2E (hex) is the address port, and 2F (hex) is the data port. Users must first assign register addresses by inputting an address value into address port 2E (hex) before writing/reading data to/from the assigned register through data port 2F (hex). AIMB-216 User Manual...
Page 101
Unlock NCT6106D Select a register for the watchdog timer Enable the function of the watchdog timer Use the function of the watchdog timer Lock NCT6106D AIMB-216 User Manual...
Page 102
0 (default = Bit 4: Read the watchdog timer status, 1 means the timer has reach timeout. AA (hex) ----- Write this address to I/O port 2E (hex) to lock the watchdog timer. AIMB-216 User Manual...
Page 103
Inc dx Mov al,10 Out dx,al ;----------------------------------------------------------- Dec dx; lock NCT6106D Mov al,0aah Out dx,al Enable the watchdog timer and set the timeout interval as 5 minutes ;----------------------------------------------------------- Mov dx,2eh; unlock NCT6106D Mov al,87h Out dx,al Out dx,al AIMB-216 User Manual...
Page 104
Enable the watchdog timer to be reset using a mouse ;----------------------------------------------------------- Mov dx,2eh; unlock NCT6106D Mov al,87h Out dx,al Out dx,al ;----------------------------------------------------------- Mov al,07h; select the watchdog timer registers Out dx,al Inc dx Mov al,08h Out dx,al ;----------------------------------------------------------- AIMB-216 User Manual...
Page 105
Dec dx; enable the watchdog timer function Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;----------------------------------------------------------- Dec dx; enable the watchdog timer to be strobed reset using a keyboard Mov al,0f2h Out dx,al Inc dx In al,dx Or al,40h Out dx,al AIMB-216 User Manual...
Page 106
Out dx,al ;----------------------------------------------------------- Dec dx; generate a timeout signal Mov al,0f2h Out dx,al; write 1 to Bit 5 of Register F7 Inc dx In al,dx Or al,20h Out dx,al ;----------------------------------------------------------- Dec dx; lock NCT6106D Mov al,0aah Out dx,al AIMB-216 User Manual...
Page 119
B.16 Power LED and Keyboard Lock Pin Header (JFP3) Table B.16: JFP3 PIN_NAME POWER_LED+ POWER_LED- FRP_KEYLOCK# B.17 General Purpose I/O Connector (GPIO1) Table B.17: GPIO1 PIN_NAME SIO_GPIO0 SIO_GPIO4 SIO_GPIO1 SIO_GPIO5 SIO_GPIO2 SIO_GPIO6 SIO_GPIO3 SIO_GPIO7 VCC_GPIO AIMB-216 User Manual...
Page 120
CPU Fan and System Fan Connectors (CPUFAN1,SYSFAN1) Table B.18: CPUFAN1,SYSFAN1 PIN_NAME FEEDBACK B.19 Front Panel Connectors (JFP1 + JFP2) Table B.19: JFP1+JFP2 PIN_NAME HDDLED+ Power Button+ HDDLED- Power Button- SPK_P3 SMB_DATA System Reset+ SPK_P4 SMB_CLK System Reset- AIMB-216 User Manual...