3.2.9
Power Management Setup
Note!
Adjust "Power management Setup" to configure the system to most
effective energy savings still consistent with the intended style of use.
!
Power-Supply Type [ATX]
This item allows user to set power-supply type, ATX or AT mode.
!
ACPI Suspend Type [S3(STR)]
This item allows user to select sleep state when in suspend.
S1(POS)
S3(STR)
!
Run VGA BIOS if S3 Resume [Auto]
This item allows system to reinitialize VGA BIOS after system resume from
ACPI S3 mode.
Power Management [User Define]
!
This item allows user to select system power saving mode.
Min Saving
Max Saving
User Define
!
Video Off Method [DPMS]
This item allows user to determine the manner is which the monitor is blanked.
V/H SYNC+Blank This option will cause system to turn off vertical and horizontal syn-
Blank Screen
DPMS
!
Video Off In Suspend [Yes]
This item allows users to turn off video when system is in suspend mode.
!
Suspend Type [Stop Grant]
This item allows users to determine the suspend type.
AIMB-210 User Manual
The suspend mode is equivalent to a software power down;
The system shuts down with the exception of a refresh current to
the system memory.
Minimum power management. Suspend Mode=1 hr.
Maximum power management. Suspend Mode=1 min.
Allows user to set each mode individually. Suspend Mode= Dis-
abled or 1 min ~1 hr.
chronization ports and write blanks to the video buffer.
This option only writes blanks to the video buffer.
Initial display power management signaling.
46