Front Panel Connectors (Jfp1/Jfp2/Jfp3); Atx Soft Power Switch (Jfp1 / Pwr_Sw); Reset (Jfp1 / Reset); Hdd Led (Jfp2 / Hddled) - Advantech AIMB-210 User Manual

2.11

Front Panel Connectors (JFP1/JFP2/JFP3)

There are several external switches to monitor and control the AIMB-210.
2.11.1

ATX soft power switch (JFP1 / PWR_SW)

If your computer case is equipped with an ATX power supply, you should connect the
power on/off button on your computer case to (JFP1/PWR_SW). This connection
enables you to turn your computer on and off.
2.11.2

Reset (JFP1 / RESET)

Many computer cases offer the convenience of a reset button. Connect the wire for
the reset button.
2.11.3

HDD LED (JFP2 / HDDLED)

You can connect an LED to connector (JFP2/HDDLED) to indicate when the HDD is
active.
2.11.4

External speaker (JFP2 / SPEAKER)

(JFP2 / SPEAKER) is a 4-pin connector for an external speaker. If there is no exter-
nal speaker, the AIMB-210 provides an onboard buzzer as an alternative. To enable
the buzzer, set pins 3-4 as closed.
23 AIMB-210 User Manual