Advantech AIMB-217 User Manual
  1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. AIMB-217
  6. User manual

Advantech AIMB-217 User Manual

Hide thumbs Also See for AIMB-217:
Table of Contents

Advertisement

Quick Links

Download this manual
User Manual
AIMB-217
AIMB-217 Intel® Pentium N4200
& Celeron N3350 & Atom x7-
E3950 Mini-ITX HDMI/DP (or
LVDS)/VGA (or eDP), 6 COM, and
Dual LAN, 8 USB, 1 MiniPCIe and
1 M.2 E key, PCIe x1

Advertisement

Table of Contents
loading

Related Manuals for Advantech AIMB-217

Summary of Contents for Advantech AIMB-217

  • Page 1 User Manual AIMB-217 AIMB-217 Intel® Pentium N4200 & Celeron N3350 & Atom x7- E3950 Mini-ITX HDMI/DP (or LVDS)/VGA (or eDP), 6 COM, and Dual LAN, 8 USB, 1 MiniPCIe and 1 M.2 E key, PCIe x1...
  • Page 2 The documentation and the software included with this product are copyrighted 2017 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to improve the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without prior written permission from Advantech Co., Ltd.
  • Page 3 Our dealers are well trained and ready to provide the sup- port required for you to experience the most from your Advantech products. Most of the problems reported are minor and can be easily solved over the phone.

  • Page 4: Declaration Of Conformity

    Caution! There is a risk of a new battery exploding if incorrectly installed. Do not attempt to recharge, force open, or heat the battery. Replace the battery only with the same or equivalent type recommended by the manufac- turer. Discard used batteries according to the manufacturer's instruc- tions. AIMB-217 User Manual...

  • Page 5: Ordering Information

    1 / (1) 2 1 x F/S Passive 0~60°C S6A1E AIMB-217N- (2 x N3350 1 / (1) 2 1 x F/S Passive 0~60°C S6A1E AIMB-217Z- (2 x 1 / (1) 2 1 x F/S Passive -20~70°C S6A1E E3950 * ( ) is not populated when MP AIMB-217 User Manual...
  • Page 6 Because of Advantech’s high quality-control standards and rigorous testing, most customers never need to use our repair service. If an Advantech product is defective, it will be repaired or replaced at no charge during the warranty period. For out-of-war- ranty repairs, users will be billed according to the cost of replacement materials, ser- vice time, and freight.
  • Page 7 Initial Inspection Before installing the motherboard, please ensure that the following items are included in your shipment:  1x AIMB-217 Intel® Pentium N4200 & Celeron N3350 & Atom x7-E3950 Mini- ITX motherboard  1 x SATA HDD cable  1 x SATA power cable ...
  • Page 8 AIMB-217 User Manual viii...

  • Page 9: Table Of Contents

    Board Layout: Jumper and Connector Locations........5 Figure 1.1 Jumper and Connector Locations....... 5 Figure 1.2 I/O Connectors ............6 AIMB-217 Board Diagram ................. 6 Figure 1.3 AIMB-217 Board Diagram .......... 6 Safety Precautions ..................7 Jumper Options..................7 1.8.1 Setting Jumpers ................
  • Page 10 3.2.3 Chipset..................64 3.2.4 Security..................77 3.2.5 Boot .................... 79 3.2.6 Save and Exit................80 Chapter Software and Service Introduction.. 81 Introduction ..................... 82 Value-Added Software Services ............. 82 4.2.1 Software API................82 4.2.2 Software Utility................84 AIMB-217 User Manual...
  • Page 11 Table A.26:AUDIO1 ..............106 Table A.27:HDMI1 ..............106 Table A.28:DP1................. 107 Table A.29:VGA1 ..............108 Table A.30:DCIN1..............108 Table A.31:USB0102/USB0304..........109 Table A.32:LAN12..............110 Table A.33:LANLED1..............111 Table A.34:SATA1/SATA2............111 Table A.35:MINI-PCIE1 ............112 Table A.36:M.2_1..............113 AIMB-217 User Manual...
  • Page 12 AIMB-217 User Manual...

  • Page 13: Chapter 1 General Information

    Chapter General Information...

  • Page 14: Introduction

    Atom x7-E3950 quad-core 1.6 GHz with DDR3L 1866 MHz up to 8GB. The AIMB-217 offers rich I/O connectivity with four USB 3.0 and eight USB 2.0 ports (USB9/10/11/12 is BOM optional), as well as six COM ports integrated in a standard 170 x 170 mm form factor.

  • Page 15: Memory

    1.3.2 Memory  RAM: 2 x SO-DIMM DDR3L 1866 MHz up to 8 GB Note! AIMB-217 supports 1.35 V memory only. Users must install the memory module on the DIMM1 socket first. 1.3.3 Input/Output  PCI bus: One PCIe x1 slot, one full size MiniPCIe and one M.2 2230 (E sky) socket ...

  • Page 16: Jumpers And Connectors

    Jumpers and Connectors The AIMB-217 motherboard is equipped with connectors for linking the board to external devices such as hard disk drives and a keyboard. The board also features several jumpers for configuring the system according to specific applications. The function of each board jumper and connector is listed in the table below. The pro- cedure for setting jumpers is explained in subsequent sections of this chapter.

  • Page 17: Board Layout: Jumper And Connector Locations

    COM1 SATA1/2 BAT1 ATX_5VSB1 COM2 JLVDS1 SYSFAN1 INV2 BIOS1 JSETCOM6_V1 MINI-PCIE1 KBMS1 GPIO1 DIMM1 JWDT1+JOBS1 JCMOS1 LPC1 JSETCOM3 INV1 PSON1 SPI_CN1 JFP2 COM3/4/5/6 DIMM2 JCASEOP_SW1 USB0506 USB0708 JACSE1 JFP1 USB1112 USB0910 Figure 1.1 Jumper and Connector Locations AIMB-217 User Manual...

  • Page 18: Aimb-217 Board Diagram

    PCIe x1 Realtek Audio Codec HD Audio ALC888S PCIe x 1 slot BIOS (colay M.2 E key) PS/2, WDT, Super I/O Nuvoton Infineon TPM 1.2/2.0 8-bit GPIO NCT6106D (optional) 5 RS-232, 1 RS-232/422/485 Figure 1.3 AIMB-217 Board Diagram AIMB-217 User Manual...

  • Page 19: Safety Precautions

    Some jumpers comprise a set of three pins, labeled 1, 2, and 3. With these jumpers, simply connect either Pins 1 and 2, or Pins 2 and 3. A pair of needle- nose pliers may be necessary for setting jumpers. AIMB-217 User Manual...

  • Page 20: Cmos Mode Selection (Jcmos1)

    1.8.2 CMOS Mode Selection (JCMOS1) The AIMB-217 motherboard contains a jumper that can erase CMOS data and reset the system BIOS information. To reset the CMOS data, Put jumper to Pins 1 & 2 as closed for a few seconds. This procedure resets the CMOS to its default settings.

  • Page 21: Lvds/Edp Panel Voltage Selection (Jlvds1/Jlvds2), Edp Is Bom Optional

    Set LVDS Panel as +12V (3-4) 1.8.5 PSON1: ATX and AT Mode Selector Table 1.6: PSON1: ATX and AT Mode Selector Closed Pins Result AT Mode 2-3* ATX Mode Default ATX Mode AT Mode 2-3 closed 1-2 closed AIMB-217 User Manual...

  • Page 22: Jwdt1 + Jobs1: Watchdog Timer Output And Obs Beep

    Case Open Pin Header Selection (JCASEOP_SW1) Table 1.8: Case Open Pin Header Selection (JCASEOP_SW1) Function Settings Normal Close Normal Open (default) 1.8.8 Power Switch/HDD LED/SMBus/Speaker Pin Header (JFP1) Table 1.9: Power Switch/HDD LED/SMBus/Speaker Pin Header (JFP1) Function Settings JFP1 (7-10) (default) AIMB-217 User Manual...

  • Page 23: Jeida/Vesa Selection (Jlvds_Vcon1)

    Pull down to GND (default) (JEIDA or VESA base on panel definition) 1.8.10 COM6 5V/12V selection (JSETCOM6_V1) Table 1.11: COM6 5V/12V selection (JSETCOM6_V1) Function Settings Set COM6_RI# as Ring (Default) Set COM6_RI# as 5V Set COM6_RI# as 12V AIMB-217 User Manual...

  • Page 24: Power Led And Ps2 Keyboard Control (Jfp2)

    1.8.11 Power LED and PS2 keyboard control (JFP2) Table 1.12: Power LED and PS2 keyboard control (JFP2) Function Setting 1-3: For power LED (Pin1: Anode, Pin3: Cathode) 4-5: Enable PS2 keyboard AIMB-217 User Manual...

  • Page 25: Chapter 2 Connecting Peripherals

    Chapter Connecting Peripherals...

  • Page 26: Introduction

    USB0304/USB0506/USB0708/USB0910/ USB1112, USB0910 & USB1112 is BOM optional) AIMB-217 provides up to four USB 3.0 and eight USB 2.0 ports. Four USB 3.0 are located on the rear side, and eight USB 2.0 are located internally. The USB interface complies with the USB specification revision 2.0 that supports transmission rates of up to 480 Mbps, revision 3.0 that supports transmission rates of up to 5 Gbps, and is...

  • Page 27: Vga Connector (Vga1)

    COM1 COM2 COM3456 AIMB-217 supports six serial ports. COM3 is RS-232/422/485 and COM1/2/4/5/6 are RS-232. COM6 also supports 5 V/12 V according to jumper selection. Users can employ JSETCOM3 to select between the RS-232/422/485 modes for COM3. Such ports can be connected to serial devices, such as a mouse or printer, or to a commu- nications network.

  • Page 28: Ps/2 Keyboard And Mouse Connector (Kbms1)

    PS/2 Keyboard and Mouse Connector (KBMS1) Onboard six-pin wafer box connector, which supports one standard PS/2 keyboard and one standard PS/2 mouse. Display Port Connector (DP1) AIMB-217 User Manual...

  • Page 29: Hdmi Connector (Hdmi1)

    HDMI connector (HDMI1) System FAN Connector (SYSFAN1) For devices with a fan installed, this connector supports cooling fans of up to 500 mA (6 W). AIMB-217 User Manual...

  • Page 30: Front Panel Connectors (Jfp1)

    2.9.4 External Speaker (JFP1/SPEAKER) (JFP1/SPEAKER) is a four-pin connector for an external speaker. If no external speaker is available, the AIMB-217 provides an onboard buzzer as an alternative. To enable the buzzer, set Pins 7-10 as closed. AIMB-217 User Manual...

  • Page 31: Power Led And Keyboard Lock Connector

    (on the back plane) Pins 2-3 closed Pins 1-2 closed to the panel switch via jumper setting cable System On Fast flashing Slow flashing System Off 2.10 Line-Out Connector (AUDIO1) This connector supports line-out, mic-in, and line-in functions. (Default: line-out) AIMB-217 User Manual...

  • Page 32: Serial Ata Interface (Sata1/2)

    2.11 Serial ATA Interface (SATA1/2) SATA1 & SATA2 AIMB-217 features a high-performance Serial ATA interface (up to 600 MB/s) that allows cabling to hard drives using long, thin cables. 2.12 PCI-Express x1 Slot (PCIEX1_1) The AIMB-217 features one PCIe x1 slot. AIMB-217 User Manual...

  • Page 33: Front Panel Audio Connector (Fp_Audio1)

    This connector is for an ATX Micro-Fit power supply. The plugs from the power sup- ply are designed to fit these connectors in only one direction. Determine the correct orientation and press firmly until the connectors mate completely. AIMB-217 User Manual...

  • Page 34: Spi Flash Connector(Spi_Cn1)

    2.15 SPI Flash Connector(SPI_CN1) The SPI flash card pin header may be used to flash the BIOS if the AIMB-217 cannot be powered on. 2.16 LVDS Backlight Inverter Power Connector (INV1)  Note! Signal Description Signal Signal Description Vadj=0.75 V (Recommended: 4.7 K, 1/16 W)

  • Page 35: Lvds Connector (Lvds1)

    2.17 LVDS Connector (LVDS1) Pin 3 : GND  Panel connected. NC / 3.3V No panel. AIMB-217 User Manual...

  • Page 36: General Purpose I/O Connector (Gpio1)

    2.18 General Purpose I/O Connector (GPIO1) 2.19 CMOS Battery Wafer Box (BAT1) AIMB-217 User Manual...

  • Page 37: Spi Bios Socket (Bios1_1)

    2.20 SPI BIOS Socket (BIOS1_1) 2.21 HD Digital Audio Interface (SPDIF_OUT1) AIMB-217 User Manual...

  • Page 38: Audio Amplifier Output Pin Header (Jamp1) (Bom Optional)

    2.22 Audio Amplifier Output Pin Header (JAMP1) (BOM Optional) 2.23 ATX Power Supply (5VSB) Connector (ATX_5VSB1) AIMB-217 User Manual...

  • Page 39: Sata Power Connector (Sata_Pwr1/2)

    2.24 SATA Power Connector (SATA_PWR1/2) SATA_PWR1 & SATA_PWR2 2.25 Case Open Detect Connector (JCASE1) AIMB-217 User Manual...

  • Page 40: Ddr3L Sodimm Socket (Dimm1/2)

    DIMM1 DIMM2 Note! AIMB-217 supports 1.35 V memory only. Users must populate the mem- ory on socket DIMM1 first. Users are advised to use memory modules of the same type, speed, and frequency for each motherboard. Memory modules of different types and speeds should not be used.

  • Page 41: E Key Connector (M.2_1)

    2.28 M.2 E key connector (M.2_1) 2.29 CMOS Clear Jumper (JCMOS1) AIMB-217 User Manual...

  • Page 42: Edp Connector (Edp1), Bom Optional

    2.30 eDP Connector (eDP1), BOM optional 2.31 eDP Backlight Inverter Power Connector (INV2), BOM optional AIMB-217 User Manual...

  • Page 43: Lan12 Led (Lanled1)

    2.32 LAN12 LED (LANLED1) AIMB-217 User Manual...
  • Page 44 AIMB-217 User Manual...

  • Page 45: Bios Operation

    Chapter BIOS Operation...

  • Page 46: Introduction

    AIMB-217 BIOS setup menu pages. BIOS Setup The AIMB-217 Series is equipped with built-in AMI BIOS and a CMOS Setup Utility that allows users to configure specific settings or activate certain system features. The CMOS Setup Utility saves the configuration in the CMOS RAM of the mother- board.

  • Page 47: Main Menu

    System Date using the <Arrow> keys. Enter new values via the keyboard. Press the <Tab> or <Arrow> keys to move between fields. The date must be entered in MM/DD/YY format. The time must be entered in HH:MM:SS format. AIMB-217 User Manual...

  • Page 48: Advanced Bios Features

    3.2.2 Advanced BIOS Features Select the Advanced tab from the AIMB-217 Setup menu to enter the Advanced BIOS Setup page. Users can select any item in the left frame of the screen, such as CPU Configuration, to access the submenu for that item. Select an Advanced BIOS Setup option by highlighting the text using the <Arrow>...
  • Page 49 3.2.2.1 Realtek PCIe GBE Family Controller AIMB-217 User Manual...
  • Page 50 AIMB-217 User Manual...
  • Page 51 3.2.2.2 Trusted Computing  Security Device Support Enable or disable BIOS support for security device. AIMB-217 User Manual...
  • Page 52 3.2.2.3 ACPI Settings  Enable ACPI Auto Configuration Enable or Disable ACPI Auto Configuration.  Enable Hibernation This item allows users to enable or disable hibernation. AIMB-217 User Manual...
  • Page 53 ACPI Sleep State This item allows users to set the ACPI sleep state.  Lock Legacy Resources This item allows users to lock legacy device resources. 3.2.2.4 SMART Settings  SMART Self Test Enable or Disable SMART Self Test AIMB-217 User Manual...
  • Page 54 3.2.2.5 Super IO Configuration AIMB-217 User Manual...
  • Page 55 AIMB-217 User Manual...
  • Page 56 AIMB-217 User Manual...
  • Page 57 AIMB-217 User Manual...
  • Page 58 AIMB-217 User Manual...
  • Page 59 AIMB-217 User Manual...
  • Page 60  Serial Ports 1/2/3/4/5/6 This item allows users to enable or disable serial Ports 1/2/3/4/5/6.  Change Settings This item allows users to change the serial port 1/2/3/4/5/6 setting. AIMB-217 User Manual...
  • Page 61 3.2.2.6 NCT6106D Configuration This page shows the AIMB-217 PC health status.  Smart Fan Function This item allows users to enable or disable the System Smart Fan function.  CPU Warning Temperature AIMB-217 User Manual...
  • Page 62 This item allows users to enable or disable the RS-485 AUTO FLOW function.  Watchdog Timer This item allows users to enable or disable the Watchdog timer. 3.2.2.7 Smart Fan Mode Configuration This page shows the details of Smart Fan Mode items. AIMB-217 User Manual...
  • Page 63 3.2.2.8 Digital I/O Configuration  Digital I/O Configuration This item will allow users to set up Digital I/O 1~8 to "input" or "output". AIMB-217 User Manual...
  • Page 64 3.2.2.9 S5 RTC Wake Settings  Wake System From S5 Enable or disable system wake on alarm event. AIMB-217 User Manual...
  • Page 65 3.2.2.10 Serial Port Console Redirection  Console Redirection This item allows users to enable or disable console redirection. AIMB-217 User Manual...
  • Page 66  Legacy Serial Redirection Port (COM1) Select a COM port to display redirection of legacy OS and legacy OPROM mes- sages. AIMB-217 User Manual...
  • Page 67 When a processor thermal sensor trips (either core), the PROCHOT# will be driven. If bi-direction is enabled, external agents can drive PROCHOT# to throt- tle the processor.  Thermal Monitor Enable or disable Thermal Monitor  Monitor Mwait Enable/disable Monitor Mwait.  P-STATE Coordination Change P-STATE Coordination type. AIMB-217 User Manual...
  • Page 68 Enable/Disable Power Limit 1.  Power Limit 1 Clamp Mode Enable/Disable Power Limit 1 Clamp Mode.  Power Limit 1 Power Power Limit 1 in Watts. Auto will program Power Limit 1 based on silicon default support value. AIMB-217 User Manual...
  • Page 69 Power Limit 1 Time Window Power Limit 1 Time Window Value in seconds. Auto will program Power Limit 1 Time Window based on silicon default support value. 3.2.2.12 Network Stack Configuration  Network Stack Enable or disable UEFI Network Stack. AIMB-217 User Manual...
  • Page 70 3.2.2.13 CSM Configuration  CSM Support Enable or disable CSM Support.. AIMB-217 User Manual...
  • Page 71 3.2.2.14 NVMe Configuration AIMB-217 User Manual...
  • Page 72 3.2.2.15 USB Configuration  Legacy USB support Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected. DISABLE option will keep USB devices available only for EFI applications. AIMB-217 User Manual...
  • Page 73 Mass storage device Mass storage device emulation type. 'AUTO' enumerates devices according to their media format. Optical drives are emulated as 'CDROM', drives with no media will be emulated according to a drive type. 3.2.2.16 Platform Trust Technology AIMB-217 User Manual...
  • Page 74  fTPM Enabled or disabled fTPM 3.2.2.17 Security Configuration AIMB-217 User Manual...
  • Page 75  TXE HMRFPO This item allows users to enable or disable TXE HMRFPO.  TXE EOP Message Send EOP Message before Enter OS. AIMB-217 User Manual...

  • Page 76: Chipset

    3.2.3 Chipset This page provides information of the chipset on AIMB-217. 3.2.3.1 North Bridge  Max TOLUD This item allows users to select the maximum value of TOLUD. AIMB-217 User Manual...
  • Page 77 Select the Video Device which will be activated during POST. This has no effect if external graphics present. Secondary boot display selection will appear based on your selection. VGA modes will be supported only on primary display.  LVDS Panel Type LVDS Panel Type selection AIMB-217 User Manual...
  • Page 78 3.2.3.2 South Bridge  OS Selection Select the target OS. AIMB-217 User Manual...
  • Page 79 3.2.3.3 Uncore Configuration GOP Configuration  GOP Driver Enable GOP Driver will unload VBIOS; Disable it will load VBIOS.  Intel Graphics Pei Display Peim AIMB-217 User Manual...
  • Page 80 Level n: Enabled with Selected Aggressiveness Level.  ALS Support Valid only for ACPI.  IGD Flat Panel Select IGD Flat Panel  IGD Boot Type Select preference for Integrated Graphics Device (IGD) display interface used when system boots. AIMB-217 User Manual...
  • Page 81  Panel Scaling Select Panel Scaling  GMCH BLC Control Back Light Control Setting. Memory Configuration  Memory Scrambler Enable/Disable Memory Scrambler support. IPU PCI Device Configuration  IPU Enable/Disable Enabled or disabled IPU Device AIMB-217 User Manual...
  • Page 82 3.2.3.4 South Cluster Configuration  PCI Express Configuration AIMB-217 User Manual...
  • Page 83 This item allows users to enable or disable the Serial-ATA Port 2 device – Spin Up Device This item allows users to enable or disable the Spin Up Device. – SATA Device Type Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. AIMB-217 User Manual...
  • Page 84 Enable or disable bytes 38h-3Fh in the upper and lower 128-byte bank of RTC RAM lockdown. – Flash Protection Range Registers Enable or disable Flash Protection Range Registers – PCIE Wake Enable or disable PCIE to wake the system from S5. AIMB-217 User Manual...
  • Page 85 PCI Express Clock Gating Enable or disable PCI Express Clock Gating – Port8xh Decode Enable or disable Port8xh Decode – Peer Memory Write Enable Enable or disable Peer Memory Write – Compliance Mode Enable or disable Compliance Mode AIMB-217 User Manual...
  • Page 86 Root PCI Express System Error on Fatal Error Enable/Disable. – SENFE Root PCI Express System Error on Non-Fatal Error Enable/Disable. – SECE Root PCI Express System Error on Correctable Error Enable/Disable. – PME SCI PCI Express PME SCI Enable/Disable AIMB-217 User Manual...
  • Page 87 Auto (default): Maintain default BIOS flow. – PCIE LTR Lock PCIE LTR Configuration Lock. – PCIe Selectable De-emphasis When the Link is operating at 5.0 GT/s speed, this bit selects the level of de- emphasis for an Upstream component. AIMB-217 User Manual...
  • Page 88 SENFE Root PCI Express System Error on Non-Fatal Error Enable/Disable. – SECE Root PCI Express System Error on Correctable Error Enable/Disable. – PME SCI PCI Express PME SCI Enable/Disable – Hot Plug PCI Express Hot Plug Enable/Disable. AIMB-217 User Manual...

  • Page 89: Security

    3.2.4 Security Select Security Setup from the AIMB-217 Setup main BIOS setup menu. All Security Setup options, such as password protection and virus protection are described in this section. To access the sub menu for the following items, select the item and press <Enter>: Change Administrator / User Password.
  • Page 90 Secure Boot Mode Secure Boot mode - Custom & Standard, Set UEFI Secure Boot Mode to STAN- DARD mode or CUSTOM mode, this change is effect after save. And after reset, the mode will return to STANDARD mode. AIMB-217 User Manual...

  • Page 91: Boot

    3.2.5 Boot  Bootup NumLock State Select the keyboard Numlock state.  Quiet Boot Enables or disableds Quiet Boot option. AIMB-217 User Manual...

  • Page 92: Save And Exit

    Restore User Defaults This item allows users to restore the user defaults for all options.  Launch EFI Shell From a File system Device Attempts to Launch EFI Shell application (Shell.efi) from one of the available filesystem devices. AIMB-217 User Manual...

  • Page 93: Software And Service Introduction

    Chapter Software and Service Introduction...

  • Page 94: Introduction

    Introduction The mission of Advantech Embedded Software Services is to “enhance users’ quality of life with Advantech platforms and Microsoft® Windows® embedded technology”. We equip Advantech platforms with Windows® embedded software products to more effectively support the embedded computing community. This eliminates the hassle of dealing with multiple vendors (hardware suppliers, system integrators, and embed- ded OS distributors) for specific projects.
  • Page 95 CPU speed according to the system load. System Throttling This refers to a series of methods for reducing system power consumption by lowering the clock frequency. This API allows users to adjust the clock frequency from 87.5% to 12.5%. AIMB-217 User Manual...

  • Page 96: Software Utility

    The Monitoring API is a utility that allows users to monitor the system health indicators, such as voltage, CPU and system temperature, and fan speed. These system values are crucial. If critical errors occur and are not solved imme- diately, permanent damage to the device may result. AIMB-217 User Manual...
  • Page 97 Chapter Chipset Software Install Utility...

  • Page 98: Before Installation

    Before Installation Before installing the enhanced display drivers and utility software, please read the instructions provided in this chapter carefully. The drivers for AIMB-217 are provided on Advantech support website: http://support.advantech.com/Support/. This driver will guide and link users to the utilities and drivers required for Microsoft Windows- based systems.

  • Page 99: Chapter 6 Graphics Setup

    Chapter Graphics Setup...

  • Page 100: Introduction

    See Chapter 5 for information regarding installing the CSI utility. Download the driver from website on your computer. Navigate to the "Graphics" folder and click "setup.exe" to complete the installation of the drivers for Windows 10. AIMB-217 User Manual...

  • Page 101: Chapter 7 Lan Configuration

    Chapter LAN Configuration...

  • Page 102: Introduction

    Windows 10 Driver Setup (Realtek 8111G) Download the driver from website on your computer. Navigate to the "AIMB-217 Realtek LAN" folder and click "setup.exe" to complete the installation of the drivers. AIMB-217 User Manual...
  • Page 103 Appendix Pin Assignments...

  • Page 104: A.1 Pin Assignments

    Pin Assignments Table A.1: ATX_5VSB1 PIN_NAME +V5SB_IN PS_ON# Table A.2: EDP1 PIN_NAME eDP_z_TX0- eDP_z_TX3- eDP_z_TX0+ eDP_z_TX3+ eDP_z_TX1- eDP_z_TX1+ eDP_z_AUX- eDP_z_AUX+ eDP_z_TX2- eDP_z_TX2+ eDP1_HPD VDD_EDP VDD_EDP AIMB-217 User Manual...

  • Page 105: Table A.3: Lvds2

    Table A.3: LVDS2 PIN_NAME LVDS2_BKLTEN LVDS2_GPIO3 LVDS2_VDD_EN LVDS2_GPIO2 LVDS_RESET LVDS2_GPIO1 LVDS2_GPIO0 Table A.4: INV2 PIN_NAME +V12_INV2 INV2_ENBKL INV2_VBR +V5_INV2 AIMB-217 User Manual...

  • Page 106: Table A.5: Lvds1

    Table A.5: LVDS1 PIN_NAME VDD_LVDS1 VDD_LVDS1 LVDS_DET# VDD_LVDS1 VDD_LVDS1 LVDS1_A0N LVDS1_A4N LVDS1_A0P LVDS1_A4P LVDS1_A1N LVDS1_A5N LVDS1_A1P LVDS1_A5P LVDS1_A2N LVDS1_A6N LVDS1_A2P LVDS1_A6P LVDS1_CLK1N LVDS1_CLK2N LVDS1_CLK1P LVDS1_CLK2P LVDS1_SCD LVDS1_SDD LVDS1_A3N LVDS1_A7N LVDS1_A3P LVDS1_A7P LVDS1_y_ENBKL LVDS1_VCON AIMB-217 User Manual...

  • Page 107: Table A.6: Jamp1

    Table A.6: JAMP1 PIN_NAME AMP_SIDE-L AMP_SIDE-R AIMB-217 User Manual...

  • Page 108: Table A.7: Fp_Audio1

    Table A.7: FP_AUDIO1 PIN_NAME MIC2L AGND MIC2R AFP_PRESEN# (Pull Up to +V3.3A) LINE2R MIC2-JD SENSEB LINE2L LINE2-JD Table A.8: INV1 PIN_NAME +V12_INV1 INV1_ENBKL INV1_VBR +V5_INV1 AIMB-217 User Manual...

  • Page 109: Table A.9: Spdif_Out1

    Table A.9: SPDIF_OUT1 PIN_NAME SPDIF_O Table A.10: COM1 PIN_NAME COM1_DCD# COM1_DSR# COM1_SIN COM1_RTS# COM1_SOUT COM1_CTS# COM1_DTR# COM1_RI# AIMB-217 User Manual...

  • Page 110: Table A.11:Com2

    Table A.11: COM2 PIN_NAME COM2_DCD# COM2_DSR# COM2_SIN COM2_RTS# COM2_SOUT COM2_CTS# COM2_DTR# COM2_RI# Table A.12: USB0506 PIN_NAME USBV45 USBV45 USB_CM_N4 USB_CM_N5 USB_CM_P4 USB_CM_P5 AIMB-217 User Manual...

  • Page 111: Table A.13:Usb0708

    Table A.13: USB0708 PIN_NAME USBV67 USBV67 USB_H0CM_N6 USB_H0CM_N7 USB_H0CM_P6 USB_H0CM_P7 Table A.14: COM3456 PIN_NAME COM3_DCD# COM3_DSR# COM3_SIN COM3_RTS# COM3_SOUT COM3_CTS# COM3_DTR# COM3_RI# COM4_DCD# COM4_DSR# COM4_SIN COM4_RTS# COM4_SOUT COM4_CTS# COM4_DTR# COM4_RI# COM5_DCD# COM5_DSR# COM5_SIN COM5_RTS# AIMB-217 User Manual...

  • Page 112: Table A.15:Sata_Pwr1,Sata_Pwr2

    Table A.14: COM3456 COM5_SOUT COM5_CTS# COM5_DTR# COM5_RI# COM6_DCD# COM6_DSR# COM6_SIN COM6_RTS# COM6_SOUT COM6_CTS# COM6_DTR# COM6_RI_V# Table A.15: SATA_PWR1,SATA_PWR2 PIN_NAME +V12 AIMB-217 User Manual...

  • Page 113: Table A.16:Gpio1

    Table A.16: GPIO1 PIN_NAME SIO_GPIO0 SIO_GPIO4 SIO_GPIO1 SIO_GPIO5 SIO_GPIO2 SIO_GPIO6 SIO_GPIO3 SIO_GPIO7 VCC_GPIO Table A.17: SYSFAN1 PIN_NAME FEEDBACK AIMB-217 User Manual...

  • Page 114: Table A.18:Jfp1

    Table A.18: JFP1 PIN_NAME +V3.3 FRP_PANSWIN# FRP_SPK2 FP_HDD_LED# FRP_SPK3 SMB_DAT PMU_RSTBTN# FRP_SPK4 SMB_CLK Table A.19: KBMS1 PIN_NAME KB_b_CLK KB_b_DAT MS_b_CLK VCC_KBMS MS_b_DAT AIMB-217 User Manual...

  • Page 115: Table A.20:Usb0910

    Table A.20: USB0910 PIN_NAME USBV1H89 USBV1H89 USB_H1CM_N8 USB_H1CM_N9 USB_H1CM_P8 USB_H1CM_P9 Table A.21: USB1112 PIN_NAME USBV1H1011 USBV1H1011 USB_H1CM_N10 USB_H1CM_N11 USB_H1CM_P10 USB_H1CM_P11 AIMB-217 User Manual...

  • Page 116: Table A.22:Jcase1

    Table A.22: JCASE1 PIN_NAME CASEOP Table A.23: BAT1 PIN_NAME +VBAT_R Table A.24: ATX12V1 PIN_NAME +VDCIN_ADP_IN +VDCIN_ADP_IN AIMB-217 User Manual...

  • Page 117: Table A.25:Pciex1_1

    PIN_NAME PRSNT1# 12V_3 12V_4 GND_6 JTAG2 JTAG3 JTAG4 JYAG5 3.3V_2 3.3V_3 PWRGD GND_7 REFCLK+ REFCLK- GND_8 HSIP0 HSIN0 GND_9 12V_1 12V_2 RSVD GND_1 SMCLK SMDAT GND_2 3.3V_1 JTAG1 3.3VAUX WAKE# RVSD GND_3 HSOP0 HSON0 GND_4 PRSNT2# GND_5 AIMB-217 User Manual...

  • Page 118: Table A.26:Audio1

    Table A.26: AUDIO1 PIN_NAME AGND LINEOL FRONT-JD LINEOR AGND Table A.27: HDMI1 PIN_NAME HDMI_CON_DP2 HDMI_CON_DN2 HDMI_CON_DP1 HDMI_CON_DN1 HDMI_CON_DP0 HDMI_CON_DN0 HDMI_CON_CKP HDMI_CON_CKN HEAC HDMI_DDC_CLK HDMI_DDC_DATA +V5_HDMI HDMI_B_HPD AIMB-217 User Manual...

  • Page 119: Table A.28:Dp1

    Table A.28: DP1 PIN_NAME DP1_0+ DP1_0- DP1_1+ DP1_1- DP1_2+ DP1_2- DP1_3+ DP1_3- DP1_AUX_EN# DP1_AUX+ DP1_AUX- DP_HPD_C +V3.3_DP1 AIMB-217 User Manual...

  • Page 120: Table A.29:Vga1

    Table A.29: VGA1 PIN_NAME VGA_z_R VGA_z_G VGA_z_B VGA1_FOC_ON +V5_VGA VGA_z_DDAT VGA_z_HS VGA_z_VS VGA_z_DCLK Table A.30: DCIN1 PIN_NAME +VDCIN_ADP_IN AIMB-217 User Manual...

  • Page 121: Table A.31:Usb0102/Usb0304

    Table A.31: USB0102/USB0304 PIN_NAME RX0- RX0+ TX0- TX0+ RX1- RX1+ TX1- TX1+ AIMB-217 User Manual...

  • Page 122: Table A.32:Lan12

    Table A.32: LAN12 PIN_NAME LAN2_MDI0+ LAN2_MDI0- LAN2_MDI1+ LAN2_MDI1- LAN2_CONN LAN2_CT LAN2_MDI2+ LAN2_MDI2- LAN2_MDI3+ LAN2_MDI3- LAN2_LED1_ACT# +V3.3A LAN2_LED2_1G# LAN2_LED0_100M# MDI_LAN1_DP0 MDI_LAN1_DN0 MDI_LAN1_DP1 MDI_LAN1_DN1 LAN1_CONN LAN1_CT MDI_LAN1_DP2 MDI_LAN1_DN2 MDI_LAN1_DP3 MDI_LAN1_DN3 LAN1_LED0_ACT# +V3.3A LAN1_LED1_1G# LAN1_LED2_100M# AIMB-217 User Manual...

  • Page 123: Table A.33:Lanled1

    Table A.33: LANLED1 PIN_NAME LAN1_ACTLED-_R LAN2_ACTLED-_R +V3.3A +V3.3A LAN1_LED1000-_R LAN2_LED1000-_R LAN1_LED2_100M# LAN2_LED0_100M# +V3.3A Table A.34: SATA1/SATA2 PIN_NAME AIMB-217 User Manual...

  • Page 124: Table A.35:Mini-Pcie1

    Table A.35: MINI-PCIE1 PIN_NAME PCI_PCIE_WAKE3# +V3.3_PIN43 +V1.5 CKREQ_a_MINIPCIE1# SIM1_PWR SIM1_DATA CLK_PCI_PCIE- SIM1_CLK CLK_PCI_PCIE+ SIM1_RESET SIM1_VPP MPCIE_F_DIS# MINIPCIE1_DET# PLTRST_MPCIE# MPCIE_MSATA_RX- +V3.3_PIN51 MPCIE_MSATA_RX+ +V1.5 SOC_SMB_CLK MPCIE_MSATA_TX- SOC_SMB_DAT MPCIE_MSATA_TX+ USB_MP_N4_C USB_MP_P4_C +V3.3_PIN43 +V3.3_PIN43 PCIE1.1#_1.0MSATA_SEL AIMB-217 User Manual...

  • Page 125: Table A.36:M.2_1

    Table A.35: MINI-PCIE1 +V1.5 MSATA#_b_PCIE_SEL +V3.3_PIN43 Table A.36: M.2_1 PIN_NAME +V3.3A_M.2 USB_HUB0_M2_z_P3 +V3.3A_M.2 USB_HUB0_M2_z_N3 I2S3_BT_BCLK SDIO_WIFI_CLK I2S3_BT_SYNC SDIO_WIFI_CMD I2S3_BT_SDI SDIO_WIFI_D0 I2S3_BT_SDO SDIO_WIFI_D1 SDIO_WIFI_D2 SDIO_WIFI_D3 LPSS_UART0_BT_WAKE# SDIO_WIFI_WAKE# LPSS_UART0_BT_RXD SDIO_WIFI_RST LPSS_UART0_BT_TXD LPSS_UART0_BT_CTS# AIMB-217 User Manual...
  • Page 126 Table A.36: M.2_1 M2_TX_P_C LPSS_UART0_BT_RTS# M2_TX_N_C M2_RX_P M2_RX_N CLK_M2_P CLK_M2_N NGFF_PMU_SUSCLK M.2_DET# NGFF_PLTRST# PCIE_REQ2_NGFF# NGFF_BT_DISABLE# PCIE_WAKE# NGFF_WIFI_DISABLE# +V3.3A_M.2 +V3.3A_M.2 AIMB-217 User Manual...
  • Page 127 AIMB-217 User Manual...
  • Page 128 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion from the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2017...

Table of Contents