Manage Fonts - Xerox 6100BD - Phaser Color Laser Printer User Manual

Using Xerox FreeFlow® Print Server IPS Manager
3- 4
with Print Services Facility (PSF) 2.1, and OS2 with PSF 2
version 2.1, do not support object containers and report object
container support as an error condition. These hosts will not
communicate with Xerox FreeFlow® Print Server IPDS unless
legacy mode is enabled
• The Disable End of Job feature improves performance for a
series of short jobs. Although IPDS job boundaries are still
recognized when this feature is in use, the print server Job
Manager does not process the jobs individually. Eliminating
the job management overhead can save a substantial amount
of time for each job, when performance is a consideration.
However, employing the Disable End Of Job feature does
prevent the print server from adding its own banners to a job
and from tracking jobs individually in the Job Manager.
Expiration of the End of Job time-out will cause the print server
to recognize the end of an IPDS job, even when Disable End
of Job is active.
Changing and saving the system configuration by clicking the OK
button requires the IPDS Gateway to inform the host regarding the
changes. This should be done while the printer is not processing
any IPDS jobs. If changes are saved while an IPDS job is printing,
the job will be interrupted and the host will either restart the job or
continue the job from the last checkpoint, which could result in
duplicated pages. This is expected behavior. Unless the job must
be interrupted to make use of the new settings, changes should
only be made while the printer is idle.

Manage Fonts

NOTE: The Manage Font Dialog only appears if you are logged
on as System Administrator.
The Manage Fonts dialog allows you to perform the following
operations for resident fonts:
• List resident fonts: When you open the Manage Fonts dialog, a
list of all resident IPDS fonts on the system is displayed.
• Delete All Resident Fonts: You are not able to delete individual
resident IPDS fonts. Instead, the Manage Font Dialog will
allow you to request deletion of all resident fonts. Note that
performing this action at the wrong time could lead to printing
errors, since the Manage Font Dialog has no way to test for
whether or not individual fonts are still in use. Therefore, a
confirmation dialog with a warning will be displayed before this
action is completed. To avoid problems, it is safest to drain the
printer and go offline before deleting fonts.
• Print Font List: When you open the Print Font List dialog, the
Manage Font Dialog provides choices for queue, sides imaged
(plex), and quantity. The Manage Font Dialog allows the font
list to print on any queue in the system. You are not able to
select which fonts are included in the printed list. Instead, the
IPDS User Guide