Reference Documents - Aix; Configuring Ibm Infoprint Manager For Windows; Configuration Overview - Windows - Xerox 6100BD - Phaser Color Laser Printer User Manual

Reference Documents - AIX

Configuring IBM Infoprint Manager for Windows

Configuration Overview - Windows

IPDS User Guide
Xerox FreeFlow® Print Server IPDS Network Connectivity Appendix
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.
2. Infoprint Manager procedure (Refer to the Infoprint Manager
for AIX: Introduction and Planning Guide and the Infoprint
Manager for AIX: Getting Started)
The following documents provide additional information on AIX-to-
IPDS printer connectivity.
Table A-3. Reference Documents - AIX
Title
Infoprint Manager for AIX: Introduction and
Planning Guide
Infoprint Manager for AIX: Getting Started
IBM Infoprint Manager for AIX: Procedures
IBM Infoprint Manager for AIX: Installation
Instructions
IBM Infoprint Manager Reference
IBM Infoprint Manager for AIX manuals are available on the IBM
website.
This section provides information on using TCP/IP to attach a
Xerox FreeFlow Print Server IPDS printer to a Windows system
using Infoprint Manager for Windows.
Configuring the Xerox FreeFlow Print Server IPDS printer with
TCP/IP on the Windows system involves setting up 2 components:
1. IPS Manager System Configuration Menu (Refer to
Configuration).
Publication
number
G544-5833
G544-5817
G544-5815
G544-5891
S544-5475
System
A- 5