Reference Documents - Windows; Testing The Printer Connection - Xerox 6100BD - Phaser Color Laser Printer User Manual

Reference Documents - Windows

Testing the Printer Connection

A - 6
NOTE: The printer IP Address is specified during the initial
software load. Set the TCP/IP port number in the IPS Manager
System Configuration dialog.
2. Infoprint Manager procedure (Refer to the Infoprint Manager
for Windows: Introduction and Planning Guide and the
Infoprint Manager for Windows: Getting Started)
The following documents provide additional information on
WIndows-to-IPDS printer connectivity.
Table A-4. Reference Documents - Windows
Title
Infoprint Manager for Windows: Introduction and
Planning Guide
Infoprint Manager for Windows: Getting Started
IBM Infoprint Manager for Windows: Procedures
IBM Infoprint Manager Reference
IBM Infoprint Manager for Windows manuals are available on the
IBM website.
Test the printer by one of the following methods to ensure the
system can make a connection with the Xerox FreeFlow Print
Server IPDS printer:
• Ping the printer from your system to establish a connection
with the TCP/IP attached Xerox FreeFlow Print Server IPDS
system.
• Send a job from the host through PSF or Infoprint Manager
(depending on your host) to print on the Xerox FreeFlow Print
Server IPDS system.
Publication
number
G544-5716
G544-5717
G544-5814
S544-5475
IPDS User Guide