System; Go Offline / Go Online; Stop / Continue; System Configuration - Xerox 6100BD - Phaser Color Laser Printer User Manual

Using Xerox FreeFlow® Print Server IPS Manager

System

3- 2
The following operator commands are located on the System
menu:
• Go Offline
• Go Online
• Stop
• Continue
•

System configuration

• Manage Fonts
• Trace
• Restart IPS Gateway

Go Offline / Go Online

This command toggles between the online and offline modes.
The IPS Manager does not go online until requested to do so.
This command is only relevant when the Channel has been
selected as the host interface on the System Configuration dialog.
This command is disabled when TCP/IP is the selected host
interface.

Stop / Continue

This command toggles the stop and continue modes. When stop
is selected, the IPDS function presents a not ready condition to
the host and all committed pages from the IPDS host stop printing.
Continue presents a ready condition and printing resumes.
System Configuration
The following lists the features that control system configuration
and affect how IPDS communicates with the host and with the
print server.
• Host Interface allows you to select the IPS Manager
connection method to the host, either TCP/IP or channel.
– Configuring the TCP/IP connection allows you to identify
the TCP/IP port number used with the TCP/IP address
assigned to the print server to send data to the IPS
Manager from the host computer.
NOTE: PSF defaults to port number 5001 if the port is not
changed in the printer definition. If you need to use something
other than the default value, do not use port numbers in use by
other print server gateways. For example, 9100 and 9400 are
default values used by Xerox FreeFlow® Print Server gateways;
DO NOT use either of these as your IPDS TCP/IP Port number.
IPDS User Guide