Time And Items Required; Parts List - IBM Storage Networking SAN128B-6 Installation, Service And User Manual

v Two people are required to install the device in a rack. One person holds the device, while the other
screws in the front and rear brackets.
v Before mounting your device, review any specific installation and facility requirements in this
Hardware Installation Guide.
v Hardware devices illustrated in these procedures are only for reference and may not depict the device
you are installing into the rack.

Time and items required

Allow 15 to 30 minutes to complete the installation.
The following items are required to install the device using the Universal Four-Post Rack Kit:
v #2 Phillips torque screwdriver
v 1/4-inch slotted-blade torque screwdriver

Parts list

The following parts are provided wit the 1U, 1.5U, and 2U Universal Kit for Four Post Racks Installation.
15
Mounting the switch