Required Fpga Levels; Table 47. Minimum Fpga Levels Required For 8260 Atm Modules - IBM 8265 Site Preparation Manual

Required FPGA Levels

76
IBM 8265: Planning and Site Preparation Guide
Some 8260 ATM modules must have a minimum FPGA level in order to operate in the
8265.
Table 47 lists the modules and the minimum FPGA levels required. The modules
must have this FPGA level, or higher, before being installed in the 8265.
If your 8260 ATM module does not have the specified FPGA level (or higher), upgrade
the module before removing it from the 8260, using MES 5099. For information on
how to upgrade FPGA code, refer to IBM 8260 Nways Multiprotocol Switching Hub,
ATM Control Point and Switch Module Installation and User's Guide , SA33-0326.

Table 47. Minimum FPGA Levels Required for 8260 ATM Modules

Module
4-Port 100Mbps
4-Port 100Mbps
12-Port 25Mbps
2-Port 155Mbps
3-Port 155Mbps
ATM WAN
ATM Carrier
ATM Carrier
8210 MSS Server
8281 ATM LAN Bridge
Other supported 8260 ATM modules (8271/8272 LAN Switch modules, for example),
are fully compatible with the 8265, and have no minimum FPGA level requirement.
Faceplate Marking
A4-SC100
A4-FB100
A12-TP25
A2-MB155
A2-MB155
A2-WAN
A-CMU1
A-CMU2
A-MSS
A04MB-BRG
Required FPGA
Level
B50
B50
C30
B50
C31
B50
B50
B50
B50
B50