A&D SW-150KL Instruction Manual page 19

Three-level comparator mode
Results
Displayed value < LO limit value
LO
(Or over in the negative value)
OK LO limit value ≤ Displayed value ≤ HI limit value
HI limit value < Displayed value
HI
(Or over in the positive value)
LO limit value = Lower limit value
HI limit value = Upper limit value
The comparator values are common to the weighing and counting mode.
Ignore the decimal point when setting the comparator values.
For example, when the weighing capacity is 6 kg and the setting value is "001000":
Display mode
Normal resolution kg
High resolution kg
Maximum resolution kg
Normal resolution oz
High resolution oz
Maximum resolution oz
Counting mode
The comparator values are maintained even if the power is turned OFF.
Judgment order of comparison is from the top row to the bottom in the comparator
mode tables
In this mode, the entered comparator values are not judged. Even if the upper limit
value is less than the lower limit value, no error will be output.
Comparison formula
Limit value
1.000 kg
1.000 kg
0.1000 kg
100.0 oz
10.00 oz
10.00 oz
1000 pcs
17
LED display
( Red LED on)
( Green LED on)）
( Red LED on)
Capacity / Minimum display
6.000 kg / 0.002 kg
6.000 kg / 0.001 kg
6.0000 kg / 0.0005 kg
210.0 oz / 0.1 oz
210.00 oz / 0.05 oz
210.00 oz / 0.02 oz