Dell GX280DT - GX280 Desktop Computer User Manual page 89

1 securing screw
2 I/O panel
3 I/O connector
4 I/O connector pull loop
Removing the I/O Panel (Mini-Tower Computer)
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTE: Note the routing of all cables as you remove disconnecting them, so that you can re route them correctly when installing the new I/O panel.
1. Follow the procedures in "Before You
NOTICE: When sliding the I/O card out of the computer, be extremely careful. Carelessness my result in damage to the cable connectors and the cable
routing clips.
2. Remove the screw that secures the I/O panel. Press on the release button and pull on the loop to slide the card away from the computer.
3. Disconnect all of the cables from the I/O card, and remove the card from the computer.
1 I/O panel release button
Begin.