Deleting Or Changing An Existing System Password; Admin Password - Dell GX280DT - GX280 Desktop Computer User Manual

NOTE: You can use Password Status in conjunction with System Password and Admin Password to further protect your computer from unauthorized
changes.

Deleting or Changing an Existing System Password

1. Enter system setup and verify that Password Status is set to Unlocked.
2. Restart your computer.
3. When prompted, type the system password.
4. Press <Ctrl><Enter> to disable the existing system password.
5. Confirm that Not Set is displayed for the System Password option.
If Not Set is displayed, the system password is deleted. If Not Set is not displayed, press <Alt><b> to restart the computer, and then repeat
through step 5.
To assign a new password, follow the procedure in
6. Exit system setup.

Admin Password

Option Settings
You cannot change or enter a new admin password if either of the following two options is displayed:
Set — An admin password is assigned.
l
Disabled — The admin password is disabled by a jumper setting on the system board.
l
You can only assign an admin password when the following option is displayed:
Not Set — No admin password is assigned and the password jumper on the system board is in the enabled position (the default).
l
Assigning an Admin Password
The admin password can be the same as the system password.
NOTE: If the two passwords are different, the admin password can be used as an alternate system password. However, the system password cannot
be used in place of the admin password.
1. Enter system setup and verify that Admin Password is set to Not Set.
2. Highlight Admin Password and press the left- or right-arrow key.
The computer prompts you to type and verify the password. If a character is not permitted, the computer emits a beep.
3. Type and then verify the password.
After you verify the password, the Admin Password setting changes to Set. The next time you enter system setup, the computer prompts you for the
admin password.
4. Exit system setup.
A change to Admin Password becomes effective immediately (no need to restart the computer).
Operating Your Computer With an Admin Password Enabled
When you enter system setup, the Admin Password option is highlighted, prompting you to type the password.
If you do not type the correct password, the computer lets you view, but not modify, system setup options.
NOTE: You can use Password Status in conjunction with Admin Password to protect the system password from unauthorized changes.
"Assigning a System Password."
step 3