Dell GX280DT - GX280 Desktop Computer User Manual page 61

User guide
Hide thumbs Also See for GX280DT - GX280 Desktop Computer:
Table of Contents

Advertisement

3 captive screw housing (2)
 
10. Close the computer cover.
NOTICE:
To connect a network cable, first plug the cable into the network wall jack and then plug it into the computer.
 
11. Connect your computer and devices to electrical outlets, and turn them on.
After you open and close the cover, the chassis intrusion detector, if installed and enabled, causes the following message to appear on the screen at
the next computer start-up:
ALERT! Cover was previously removed.
 
12. Reset the chassis intrusion detector by changing Chassis Intrusion to On or On-Silent.
NOTE:
If an admin password has been assigned by someone else, contact your network administrator for information on resetting the chassis intrusion
detector.
Back to Contents Page
 

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gx280 - optiplex - sd

Table of Contents