See the documentation that came with the card for information on configuring the card, making internal connections, or otherwise customizing it for your

computer.

CAUTION:

Some network adapters automatically start the computer when they are connected to a network. To guard against electrical shock, be

sure to unplug your computer from its electrical outlet before installing any cards.

5. Press the lever on the retention arm and raise the retention arm.

6. Insert the card into the card connector.

If the card is full-length, insert the end of the card into the card guide bracket as you lower the card toward its connector on the system board. Insert

the card firmly into the card connector on the riser board.

lever

retention arm

filler bracket

PCI Express x1 card

7. Lower the retention arm and press it into place, securing the card into the card connector.

8. Replace the card cage:

a. Align the tabs in the side of the card cage with the slots on the side of the computer, and slide the card cage down into place.

b. Ensure that the riser board is fully seated in the connector on the system board.

1 card cage

2 tabs (2)

3 slots (2)