5. Remove the insert from the insert frame by pressing on the four tabs.
1 insert frame for CD/DVD drive bay
2 insert frame for floppy drive bay
6. Reattach the empty insert frame over the front of the drive bay.
The insert frame fits only one way.
Floppy Drive
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
Follow the procedures in
"Before You
Removing a Floppy Drive
1. Disconnect the power and floppy-drive cables from the back of the floppy drive.
2. Disconnect the other end of the floppy-drive cable from the system board (labeled DSKT).
1 power cable
2 floppy-drive cable
3 floppy-drive connector (DSKT)
Begin."