Step 6: Turn On The Personal Computer And Install The Operating System; Customizing The Monitor Display; Protecting Your Software; Compaq Restore Cd - Compaq iPAQ User Manual

Quick Setup

Step 6: Turn On the Personal Computer and Install the Operating System

Ä

Customizing the Monitor Display

Protecting Your Software

Compaq Restore CD

7
Press the power button to turn on the personal computer. Refer to "Step 2:
Identify Rear Panel Components and Confirm Voltage Setting" on page 2 for
the location of the power button.
The first time you turn on the Personal Computer, the operating system is
installed automatically. This process takes about 10 minutes, depending on
which operating system is being installed. Carefully read and follow the
instructions that appear on the screen to complete the installation.
CAUTION: Once the automatic installation has begun, DO NOT TURN OFF THE COMPUTER UNTIL
THE PROCESS IS COMPLETE. Turning off the Personal Computer during the installation process
might damage the software that runs the Personal Computer.
When the Welcome to Windows screen is displayed, the Windows installation
process is complete.
You can manually select or change the monitor brand, model, refresh rates,
color, resolution, and power management settings. Select the Display icon in
the Windows Control Panel to change display settings, or refer to the online
documentation provided with the graphics controller utility.
To protect your software from loss or damage, you should keep a backup copy
of all system software, applications, and related files stored on your hard
drive. Refer to your operating system or backup utility documentation for
instructions on making backup copies of your data files.
Along with the operating system CD, the Compaq Restore CD enables you to
recover the original operating system, Internet browser, and NIC or modem
drivers. This can be extremely helpful in the event of hard drive failure or
corruption. Additional support software for specific models may be
downloaded from www.compaq.com/support. To use the Compaq Restore
CD, insert the CD into the CD-ROM drive and restart the computer. Carefully
read and follow all instructions that appear on the screen.
Quick Setup & User's Guide