Preparation Before Sewing; Installing The Needle - Brother T-8422A Instruction Manual
Twin needle direct drive lock stitcher, twin needle direct drive lock stitcher with thread trimmer, twin needle direct drive split needle bar lock stitcher with thread trimmer, twin needle direct drive lock stitcher with large hook and thread trimmer, twi
Table of Contents
Advertisement
4. PREPARATION BEFORE SEWING
4-1. Installing the needle
Turn off the power switch before installing the needle.
The machine may operate if the treadle is depressed by mistake, which could result in injury.
<T-8421A, 8422A, 8722A>
<T-8452A, 8752A>
CAUTION
Long groove
2894M
Long groove
3125M
T-8421A, 8422A, 8452A, 8722A, 8752A
4. PREPARATION BEFORE SEWING
1. Turn the machine pulley to move the needle bar to its
highest position.
2. Loosen the screws (1).
3. Insert the needle (2) straight in as far as it will go so that the
long groove is facing inward, and then securely tighten the
screws (1).
16
Hide quick links:
Advertisement
Table of Contents
