Other Cords - Brother T-8422A Instruction Manual
Twin needle direct drive lock stitcher, twin needle direct drive lock stitcher with thread trimmer, twin needle direct drive split needle bar lock stitcher with thread trimmer, twin needle direct drive lock stitcher with large hook and thread trimmer, twi
Table of Contents
Advertisement
3. INSTALLATION
<Single-phase>
13
<Three-phase>
Green and yellow wire
(ground wire)
T-8421A, 8422A, 8452A, 8722A, 8752A
3. Other cords
2890M
(1) 6-pin power supply connector
(2) 4-pin motor connector
(3) Wire clip
(4) Power cord
<For single-phase specifications>
Insert the power cord plug (5) into a
wall outlet.
<For three-phase specifications>
1. Attach an appropriate plug to the
power cord (4). (The green and
yellow wire is the ground wire.)
2. Insert
the
properly-grounded AC power supply.
NOTE:
Do
not
use
otherwise
problems may result.
2891M
plug
into
a
extension
cords,
machine
operation
Hide quick links:
Advertisement
Table of Contents
