Sewing Fixed Stitches - Brother T-8422A Instruction Manual

5-3. Sewing fixed stitches

2912M
1
2
3
<Automatic thread trimming (Models with thread trimmer only)>
Press the thread trimming key to turn on the thread trimming function. When the treadle is
continuously depressed, thread trimming is carried out after the fixed stitches have been sewn.
<Automatic sewing>
When the AUTO key is pressed to turn on the automatic sewing function, the fixed stitches are sewn
simply by depressing the treadle once without needing to depress it continuously.
<Start and end backtack sewing>
• The start backtack key and end backtack key can be pressed to turn on the backtack sewing
• If changing the number of end backtack stitches in C and D, press the fixed stitch key to
After the set number of stitches in E (fixed stitches) have been sewn, the sewing machine
stops in the needle position that has been set by the needle up/down key (refer to p.26). After
this, normal sewing is carried out if the treadle is depressed.
After the treadle is depressed backward, the thread is trimmed (models with thread trimmer)
and the sewing machine switches to fixed stitch sewing mode.
function.
temporarily turn off the fixed stitch function before making the change. (The CD display will show
the number of stitches and the setting can then be changed.)
T-8421A, 8422A, 8452A, 8722A, 8752A
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Example:
From 1 to 1999 stitches can be set.
2161M
2159M
2160M
28