Cisco 7604 Configuration Manual page 593

Chapter 25 Monitoring the Firewall Services Module
Table 25-3 SNMP MIB and Trap Support (continued)
MIB and Trap
CISCO-FIREWALL-MIB
CISCO-IPSEC-FLOW-MONITOR-MIB
CISCO-L4L7-RESOURCE-LIMIT-MIB
CISCO-MEMORY-POOL-MIB
CISCO-NAT-EXT-MIB
CISCO-PROCESS-MIB
CISCO-REMOTE-ACCESS-MONITOR-MIB The FWSM supports browsing of the MIB.
CISCO-SYSLOG-MIB
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
OL-20748-01
Description
The FWSM supports browsing of the MIB.
The FWSM supports browsing of the following group:
cfwSystem
•
The information in cfwSystem.cfwStatus, which relates to failover
status, pertains to the entire device and not just a single context.
The FWSM supports browsing of the following table:
cfwConnectionStatTable
•
The FWSM supports browsing of the MIB.
The FWSM sends the following traps:
• start
• stop
The FWSM supports browsing of the MIB.
The FWSM supports browsing of the following traps:
limit-reached
•
rate-limit-reached
•
The FWSM supports browsing of the following tables:
ciscoL4L7ResourceLimitTable
•
ciscoL4L7ResourceRateLimitTable
•
The FWSM supports browsing of the following table:
• ciscoMemoryPoolTable—The memory usage described in this table
applies only to the security appliance general-purpose processor, and
not to the network processors.
The FWSM supports browsing of the MIB.
The FWSM supports browsing of the MIB.
The FWSM supports browsing of the following table:
cpmCPUTotalTable
•
The FWSM sends the following trap:
rising threshold
•
The FWSM sends the following trap:
• session-threshold-exceeded
The FWSM sends the following trap:
clogMessageGenerated
•
You cannot browse this MIB.
Configuring SNMP
25-27