Cisco 7604 Configuration Manual page 286

Configuring Failover
Viewing Failover Status for Active/Standby
The following is sample output from the show failover command for Active/Standby failover.
Table 14-4
hostname# show failover
Failover On
Failover unit Primary
Failover LAN Interface: fover Vlan 100(up)
Unit Poll frequency 1 seconds, holdtime 3 seconds
Interface Poll frequency 15 seconds
Interface Policy 1
Monitored Interfaces 2 of 250 maximum
failover replication http
Last Failover at: 22:44:03 UTC Dec 8 2004
Stateful Failover Logical Update Statistics
In multiple context mode, using the show failover command in a security context displays the failover
information for that context. The information is similar to the information shown when using the
command in single context mode. Instead of showing the active/standby status of the unit, it displays the
active/standby status of the context.
Failover On
Last Failover at: 04:03:11 UTC Jan 4 2003
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
14-32
provides descriptions for the information shown.
This host: Primary - Active
Active time: 13434 (sec)
Interface inside (10.130.9.3): Normal
Interface outside (10.132.9.3): Normal
Other host: Secondary - Standby Ready
Active time: 0 (sec)
Interface inside (10.130.9.4): Normal
Interface outside (10.132.9.4): Normal
Link : fover Vlan100 (up)
Stateful Obj xmit
General 1950
sys cmd 1733
up time 0
RPC services 0
TCP conn 6
UDP conn 0
ARP tbl 106
Xlate_Timeout 0
VPN IKE upd 15
VPN IPSEC upd 90
VPN CTCP upd 0
VPN SDI upd 0
VPN DHCP upd 0
Logical Update Queue Information
Cur
Recv Q: 0
Xmit Q: 0
This context: Negotiation
Active time: 1222 (sec)
Interface outside (192.168.5.121): Normal
Interface inside (192.168.0.1): Normal
Peer context: Not Detected
Active time: 0 (sec)
Interface outside (192.168.5.131): Normal
Interface inside (192.168.0.11): Normal
xerr rcv
0 1733
0 1733
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
0 0
Max Total
2 1733
2 15225
Table 14-4 provides descriptions for the information shown.
Chapter 14 Configuring Failover
rerr
0
0
0
0
0
0
0
0
0
0
0
0
0
OL-20748-01