Chapter 4
Configuring Security Contexts
Configuring Resource Management
The number is an integer greater than or equal to 1. 0 (without a percent sign (%)) sets the resources
to the system limit. You can assign more than 100 percent if you want to oversubscribe the device.
•
To set a particular resource limit, enter the following command:
hostname(config-resmgmt)# limit-resource [rate] resource_name number[%]
For this particular resource, the limit overrides the limit set for all. Enter the rate argument to set
the rate per second for certain resources. See
Table 4-2
for resources for which you can set the rate
per second.
Table 4-2
lists the resource types and the limits. See also the show resource types command.
Catalyst 6500 Series Switch and Cisco 7600 Series Router Firewall Services Module Configuration Guide using ASDM
4-25
OL-20748-01