Set Port Advertise - Enterasys C3G124-24 Configuration Manual

Mode
Switch command, read-only.
Example
This example shows how to display advertisement status for ports 13 and 14:
C3(su)->show port advertise ge.1.13-14
ge.1.13
-------------------------------------------------
10BASE-T
10BASE-TFD
100BASE-TX
100BASE-TXFD
1000BASE-T
1000BASE-TFD
pause
ge.1.14
-------------------------------------------------
10BASE-T
10BASE-TFD
100BASE-TX
100BASE-TXFD
1000BASE-T
1000BASE-TFD
pause

set port advertise

Use this command to configure what a port will advertise for speed/duplex capabilities in auto-
negotiation.
Syntax
set port advertise {port-string}{10t | 10tfd | 100tx | 100txfd | 1000t | 1000tfd
| pause}
Parameters
port-string
10t
10tfd
100tx
100txfd
1000t
1000tfd
pause
Defaults
None.
capability advertised
yes yes
yes yes
yes yes
yes yes
no no
yes yes
yes yes
capability advertised
yes yes
yes yes
yes yes
yes yes
no no
yes yes
yes yes
Select the ports for which to configure advertisements. For a detailed
description of possible port-string values, refer to
in the CLI" on page 11-1.
Advertise 10BASE-T half duplex mode.
Advertise 10BASE-T full duplex mode.
Advertise 100BASE-TX half duplex mode.
Advertise 100BASE-TX full duplex mode.
Advertise 1000BASE-T half duplex mode.
Advertise 1000BASE-T full duplex mode.
Advertise PAUSE for full-duplex links.
remote
yes
yes
yes
yes
no
yes
no
remote
yes
yes
yes
yes
no
yes
no
"Port String Syntax Used
Enterasys C3 Configuration Guide 11-17
set port advertise