Preparing The Server For Rack Installation - HP DL740 - ProLiant - 4 GB RAM User Manual

Installing the Server in a Rack
5. Insert the two rail tabs from the rack rail assembly into the marked holes on the
inside of the front of the rack.
Figure 2-5: Inserting the rail tabs on the front of the rack
6. Release the rail compression lever to seat the tabs in the rack post.
7. Repeat steps 1 through 6 for the other rail.

Preparing the Server for Rack Installation

To prepare the server for rack installation:
•
Attach the server rails
•
Lighten the chassis
2-18 HP ProLiant DL740 Server User Guide