Server Access Overview - HP DL740 - ProLiant - 4 GB RAM User Manual

Server Access

Server Access Overview

The ProLiant DL740 server chassis facilitates the installation of hardware upgrades
through the use of two removable modules and top access panels. The following table
describes the contents of the modules and how to access the components.
Table 3-1: Module and Bay Components and Access
Module
Host module
Power and media module
The following sections provide instructions for removing the power and media
module and host module. For information pertaining to PCI Hot Plug and hot-plug
fan access, refer to Chapter 5.
CAUTION: Do not attempt to remove either of the modules while power is applied to
the system. They are not hot-pluggable. Immediate system shutdown and data loss
will occur.
3-2
Contents
PCI Hot Plug expansion slots
Configuration switches
Fans 1 and 2
Processor sockets
Memory (DIMMs)
Power supply 1 and 2
Universal media bay
Hot-plug hard drives
Access Method
Open the top access panels.
Open the top access panels.
Open the top access panels.
Open the top access panels and
remove the processor boards.
Open the top access panels and
remove the memory cartridge.
Access directly at the front
of the server.
Access directly at the front
of the server.
Access directly at the front
of the server.
HP ProLiant DL740 Server User Guide