Installing the Server in the Rack
To complete the server rack installation, load the server onto the rack rails and
reinstall the server modules.
Loading the Server onto the Rack Rails
WARNING: To avoid destabilizing the rack, install servers starting from the
bottom of the rack.
To install the server in the rack:
1. Pull the inner slide rail forward from each rack rail assembly until it locks into
place (1).
2. Slide the inner bearing brace forward until it stops (2).
Figure 2-7: Locking the inner slide rails into place
HP ProLiant DL740 Server User Guide
Installing the Server in a Rack
2-21