HP DL740 - ProLiant - 4 GB RAM User Manual page 249

Table D-4: Memory Cartridge LED State Definitions
LED Indicator
Cartridge Power
LED (green)
Cartridge Attention
LED (amber)
DIMM Status LED
(amber)
HP ProLiant DL740 Server User Guide
State
Solid
Off
Blinking
Off
Solid (No DIMM
status LED)
Solid (DIMM status
LED solid)
Blinking
Blinking with cartridge
power LED solid
(alarm sounds)
Off
Solid
Blinking
Blinking with cartridge
power LED solid
Condition
Cartridge online
(normal)
Cartridge not online
Cartridge rebuild and
verify in progress
Normal
Power fault detected
ECC error
Power fault detected
Cartridge online but
unlocked (other
cartridges may need
attention)
Normal
ECC error
Configuration error
DIMM installed but
not available to
operating system
(hot-add or
hot-upgrade in
progress)
LED Indicators and Switches
Action
None
Lock cartridge or check
other LEDs.
Wait until LED stops
blinking.
None
Replace cartridge
Replace DIMM.
Replace cartridge or
shorted DIMM.
Lock cartridge and do not
remove.
None
Replace DIMMs.
Remove cartridge and fix
error.
Complete hot-add or
hot-upgrade operation on
remaining cartridges.
D-17