Cable Management System - HP DL740 - ProLiant - 4 GB RAM User Manual

Cable Management System

The cable management system is installed on the back of the server mounted in the
rack and consists of two cable management system reel assemblies and a cable
management system harness.
NOTE: If you are installing the optional Cable Management Arm for a ProLiant DL740 server,
refer to the documentation provided with the option kit.
To install the cable management system:
1. Install the first reel (labeled with the number 3) to the left of the server chassis by
aligning the stand-offs on the back of the server and rotating the reel until locked
in place.
Figure 6-3: Installing the left cable reel
HP ProLiant DL740 Server User Guide
Cabling the Server
6-5