Drive Bay Configuration; System Drive Cable Management - HP ProLiant MicroServer Maintenance And Service Manual

Drive bay configuration

The server supports four drive bays—four drive bays for 3.5-inch non-hot-plug SATA hard disk drives
(HDD).
NOTE: The server does not support hot-plug hard disk drives.
Go to the HP website at
information on supported system drives.
IMPORTANT:
2, hard drive 3 and hard drive 4.
Item Description
1 Hard disk drive 1
2 Hard disk drive 2
3 Hard disk drive 3
4 Hard disk drive 4

System drive cable management

The figures in this section illustrate the system drives' data and power cable connections.
www.hp.com
When installing the hard drives, should install them from hard drive 1, then hard drive
and refer to the options list for this server model for the latest
Removal and replacement procedures 34