List Of Parameters - Brother KE-430F Instruction Manual

<List of parameters>
Parameter Setting range and initial value
[For program numbers 1 to 89 (1 to 64 for the
438F)]
The setting cannot be changed.
[For program numbers 200 to 999]
Pattern
"---", 1 to 89 (1 to 64 for the 438F), additional
recorded pattern numbers.
20% - 200%
(Limited by available sewing area.)
(Initial value is 100%.)
* The setting can be displayed in "mm" units by
setting memory switch No. 402 to "ON".
X-scale
20% - 200%
(Limited by available sewing area.)
(Initial value is 100%.)
* The setting can be displayed in "mm" units by
setting memory switch No. 402 to "ON".
Y-scale
430F: 200 sti/min to 3200 sti/min
438F: 200 sti/min to 2700 sti/min
Setting units are 100 sti/min.
(Initial value is 2000 sti/min.)
* The setting is displayed in units of 10 sti/min.
For a setting of 2000 sti/min, the display will
Sewing
be "200".)
speed
5. USING THE OPERATION PANEL (BASIC OPERATIONS)
Initial value
Initial value
Initial value
Initial value
KE-430F, BE-438F
Display
2405B
2406B
2407B
2408B
38