Download  Print this page

Brother KE-430F Instruction Manual Page 46

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer.
Hide thumbs

Advertisement

5. USING THE OPERATION PANEL (BASIC OPERATIONS)
4
Select the item to be changed.
Pattern
Change the setting for the parameter.
5
(Refer to "List of parameters" on the next page for details
on parameter changes. )
6
Apply the changed parameter setting.
7
Repeat steps 4 to 6 above to record the settings for each parameter.
If you would like to continue setting another program, repeat steps 2 to 7 above.
8
9
Exit program mode.
2404B
37
X-scale
Y-scale
Sewing speed
TEST indicator switches off
Press the SELECT key.
・ The selected parameter changes in the order shown in
the illustration below each time the SELECT key is
pressed.
Slow start pattern
Press the
setting.
・ The flashing display means that the parameter setting
has not yet been applied.
・ You can make the initial setting appear in the display
by pressing the RESET key.
2402B
Press the ENTER key.
・ The display will change from flashing to illuminated,
and this means that the setting has been applied.
・ If you press the SELECT key or the TEST key without
pressing the ENTER key, you can cancel the
parameter changes.
2403B
Press the TEST key.
・The display will return to the normal display.
KE-430F, BE-438F
Upper thread tension
or
key to change the parameter
2401B
2382B 2383B

Advertisement

Table of Contents

   Related Manuals for Brother KE-430F

This manual is also suitable for:

Be-438fKe-430f series

Comments to this Manuals

Symbols: 0
Latest comments: