Download  Print this page

Brother KE-430F Instruction Manual Page 32

Electronic direct drive lockstitch bar tacker electronic direct drive lockstitch button sewer.
Hide thumbs

Advertisement

3. INSTALLATION
Operator
23
Green and yellow wire
(ground wire)
KE-430F, BE-438F
<200 V system >
(1) Power switch
(2) Screws [2 pcs]
4145M
(3) 3-pin power supply connector
2347B
(4) Power cord
(5) Staples [5 pcs]
1. Attach an appropriate plug to the
power cord (4). (The green and yellow
wire is the ground wire.)
2. Insert
the
properly-grounded electrical outlet.
NOTE:
• Take care when tapping in the staples
(5) to make sure that they do not pierce
the cords.
• Do not use extension cords, otherwise
machine
operation
result.
3. Use the six screws to tighten the cover
of the control box. Check that none of
the cords are being clamped by the
cover at this time.
power
plug
into
a
problems
may

Advertisement

Table of Contents

   Related Manuals for Brother KE-430F

This manual is also suitable for:

Be-438fKe-430f series

Comments to this Manuals

Symbols: 0
Latest comments: