Figure 12. Attaching The Heat Sink To The Processor - Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH Product Manual

NOTE
The bottom of the heat sink may have thermal interface material (TIM)
already applied. Be careful not to damage the thermal interface material.
5. If there is no thermal interface material on the bottom of the heat sink, use the enclosed syringe
and apply the thermal interface material to the top of the processor.
6. Place the fan heat sink on top of the processor.
46

Figure 12. Attaching the Heat Sink to the Processor

TP00208
Intel Server Board S875WP1-E Product Guide