Peripheral Configuration Submenu; Table 22. Peripheral Configuration Submenu - Intel S875WP1 - EATX MBD 875 P4 DDR-2CH SATA RAID VID GETH Product Manual

Peripheral Configuration Submenu

To access this submenu, select Advanced on the menu bar, then Peripheral Configuration.
Maintenance
The submenu represented in Table 22 is used for configuring server peripherals.
Table 22. Peripheral Configuration Submenu
Feature
Serial Port A
Base I/O Address
Interrupt
Serial Port B
Mode
Base I/O address
Interrupt
74
Advanced
Main
PCI Configuration
Boot Configuration
Peripheral Configuration
Drive Configuration
Floppy Configuration
Event Log Configuration
Video Configuration
USB Configuration
Chipset Configuration
Fan Control Configuration
Hardware Monitoring
Remote Access Configuration
Options Description
Disabled Configures serial port A.
Enabled Auto assigns the first free COM port, normally COM1, the address
3F8h, and the interrupt IRQ4.
Auto (default)
An * (asterisk) displayed next to an address indicates a conflict
with another device.
This option is available only when Serial Port A is set to Enabled.
3F8 (default)
2F8 Specifies the base I/O address for serial port A.
3E8
2E8
IRQ 3 This option is available only when Serial Port A is set to Enabled.
Specifies the interrupt for serial port A.
IRQ 4 (default)
Configures serial port B.
Disabled
Enabled Auto assigns the first free COM port, normally COM 2, the address
3F8h, and the interrupt IRQ4.
Auto (default)
An * (asterisk) displayed next to an address indicates a conflict
with another device.
Normal This option is available to set Serial Port B Mode. This includes
Normal and Infared Modes.
IrDA SIR-A
ASK_IR
3F8 This option is displayed only if Serial Port B is set to Enabled.
2F8 (default) Specifies the base I/O address for serial port B.
3E8
2E8
IRQ 3 (default) This option is displayed only if Serial Port B is set to Enabled
IRQ 4 Specifies the interrupt for serial port B.
Security Power
Intel Server Board S875WP1-E Product Guide
Boot Exit
continued