Removing A Processor - Intel S5000VCL - Server Board Motherboard User Manual

Removing a Processor

1. Observe the safety and ESD precautions in
2. Turn off all peripheral devices connected to the server. Turn off the server.
3. Remove the AC power cord from the server.
4. Remove the server's cover. See the documentation that came with your server
chassis for instructions on removing the server's cover.
5. Unplug the processor fan cable from the server board.
6. Loosen the four captive screws on the corners of the heat sink.
7. Twist the heat sink slightly to break the seal between the heat sink and the
processor.
8. Lift the heat sink from the processor. If it does not pull up easily, twist the heat sink
again. Do not force the heat sink from the processor. Doing so could damage the
processor.
9. Lift the processor lever.
10. Remove the processor.
11. If installing a replacement processor, see
reinstall the chassis cover.
22
"Safety Information".
"Installing the Processor". Otherwise,
Intel® Server Board S5000VCL User Guide