11. Continue with the steps under
Installing the Processor
These steps assume you have just removed your heat sink and processor and your server
system is powered down and unplugged. If this is not true, see
and Processor" on page 10
Caution: Do not touch the socket pins; they are very sensitive and easily damaged.
1. Remove the processor from the packaging box and remove the protective shipping
cover.
2. Orient the processor with the socket so the processor cutouts match the socket
notches, then set the processor into place.
12
Figure 9. Removing the Processor
"Installing the
before following these steps.
AF000416
Processor".
"Removing the Heat Sink
Intel® Server Board X38ML User Guide