Appendix A Obtaining Hp Netraid Utilities - HP D7171A - NetServer - LPr Configuration Manual

APPENDIX A Obtaining HP NetRAID Utilities

To get updated versions of the HP NetRAID utilities that contain firmware, driver and the HP NetRAID Assistant
program, you must download, extract, and then copy of nr_clust.exe, a special version of the HP NetRAID utilities
for cluster installations.
To obtain NetRAID firmware, you need to download nr_clust.exe from the HP's FTP site.
Once you have downloaded nr_clust.exe, you need to extract and copy the HP NetRAID files and utilities to floppy
diskettes.
To extract and copy the HP NetRAID utilities:
1. From Windows NT Explorer, run nr_clust.exe by double-clicking the file.
nr_clust.exe is self-extracting and when executed creates the three subdirectories shown in the following
table.
File Sub-Directory
Fw_dvr
Nrast_1
Nrast_2
2. Label three blank formatted diskettes as indicated in the above table.
3. Copy the contents of each of the subdirectories to an appropriately labeled floppy disk.
You will also need a DOS bootable diskette, since the NetRAID firmware update utility runs under DOS.
HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997
[Enter FTP site address here]
Contents Description
NetRAID firmware update and NetRAID Driver
for Windows NT
HP NetRAID Assistant program Setup.
HP NetRAID Assistant program files.
Disk Label
NetRAID Firmware & Driver
HP NetRAID Assistant 1
HP NetRAID Assistant 2
33