HP D7171A - NetServer - LPr Configuration Manual page 19

4. Swing the door open, as shown in Step 2.
5. Lift the door off the chassis.
Repeat Steps 1-5 for each Storage System/6 to be included in the cluster.
HP Storage System/6 Internal Cabling
Using the schematic view of the HP Storage System/6's internal cabling shown below, you need to check and, if
necessary re-route, the three cables located inside the storage unit. These are:
C14: A short cable connecting lower cage to upper cage
C20: A cable connecting the external port and routed to the "in" side of the lower disk cage
C20: A cable connecting the other external port to the top cage
Cabling Diagram Legend
Cable Label
C14
C20
HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997
Description
Fast-Wide SCSI (68 pin) cable
Fast-Wide SCSI (68 pin) cable with external connector
C20
SCSI B
SCSI A
SCSI C SCSI D
Schematic View of Storage System/6 Cabinet Internal Cabling
Part 2: Setting Up the HP Storage System/6
SCSI Device
SCSI Device
C14
C20
Hot Swap
Subsystem
Part Number
5182-6747
5182-9326
Shelf
Shelf
UPPER
CAGE
LOWER
CAGE
10