HP D7171A - NetServer - LPr Configuration Manual page 33

2. Click on a disk box to select one of the disks that includes an array to be shared by the cluster.
Disk Administrator highlights the selected disk.
3. Select Tools from the pull-down menu, and choose Assign Drive Letter.
4. Based on the Volume Labels you assigned the arrays ("Shared F" in the above example), assign a drive
letter that matches the System A drive letter assignment.
Disk Administrator updates the disk driver letter assignment.
5. Repeat steps 2 through 5 to make permanent drive letter assignments for each array initialized from System
A.
Be sure that the drive letters for all arrays (logical drives) recognized by System B match System A's
"sticky" assignments.
6. Close Disk Administrator.
The arrays are now fully configured for use by the cluster.
The HP NetServer systems and the shared disks are ready for you to proceed to "Part 6: Installing and Testing
Microsoft Cluster Server Software."
HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997
Part 5: Installing HP NetRAID Software and Configuring the Disk Arrays
Disk Administrator, Mismatched Drive Letters
24