HP D7171A - NetServer - LPr Configuration Manual page 11

Unless otherwise specified, when more than one component is required, the additional component(s) must be
identical in manufacture and configuration.
Hardware
The following hardware components are required for HP NetServer LH Pro cluster installations.
Quantity
System A
1 HP NetServer LH Pro
1 Display
1 HP 64MB, 60ns RAM
1 System Disk (not part of shared storage)
1 Generic PCI Ethernet LAN adapter
1 HP J3171A 10/100TX PCI Ethernet LAN Adapter (for cluster LAN)
1 HP D4943A HP NetRAID Adapter
1 HP D5957A NetRAID Cluster Adapter
1 HP D4921A Power Supply (redundant)
1-2 HP Storage System/6
2-12 Hot Swap Disk Drive (shared storage)
Dual Processor Requirement
Uni-processor HP NetServers LH Pros are not supported by the Microsoft Server Cluster. To upgrade an HP
NetServer's processing capability to allow cluster operations, see HP Order Assistant (below) for the required
hardware, and refer to the appropriate instructions in HP Information Assistant (below).
Required Tools
When installing an HP NetServer LH Pro using an HP NetServer Storage System/6, you will need the following
tools to disassemble and re-assemble the hardware:
1/4" flat-blade screwdriver
TM
Torx driver (#T15)
Paper clip, or similar pointed instrument (used to toggle small dip switches)
Flashlight (optional)
Portable Field Service Grounding Kit (3M part number 8505, or equivalent)
HP NetServer LH Pro Microsoft Cluster Installation Guide - 1 October 1997
Hardware Component
Shared Storage
Overview of an HP NetServer LH Pro Cluster Installation
Quantity
System B
1
1
1
1
1
1
1
1
1
2