About This Cabling Reference; Introduction; Before You Use This Reference; Purpose Of This Document - HP D7171A - NetServer - LPr Manual

1 About This Cabling Reference

Introduction

Before You Use This Reference

This cabling reference assumes that you have the rack assembly process
completed, have mounted the HP NetServer LH 4r, and are ready to cable the
components in the rack enclosure.
For instructions on how to install the HP NetServer LH 4r in a rack, consult the
installation guide or user guide shipped with your unit.
NOTE
For instructions on how to assemble other components in a
rack, please find and follow the documentation shipped with
your rack components. Look for this documentation first
inside the rack. If there is no such documentation with your
rack, check the separately orderable installation kit. Or, use
the generic rack assembly process described in this chapter.

Purpose of This Document

This reference provides information for cabling the HP NetServer LH 4r,
including power consumption and current requirements. It is written for rack
installers who have installed the HP NetServer LH 4r in a rack and need
information about how to connect data and power cables. It contains:
A review of the generic steps for building a rack installation
Site preparation information
Illustrations of electrical power components
A diagram for use in connecting data cables between the HP NetServer
LH 4r and other system components
Illustrations for installing Power Di stribution Units (PDU) in the rack
Power cabling information for rack-mounted electronic components
Power, current, and component reference information
1