Chapter 2
The 208-240 VAC, wide-voltage-range-rated, switchless version of the Power
Distribution Unit (PDU) can be mounted in several configurations with the LH
4r. One of these configurations is shown in Figure 2-3 below. Others are listed in
Table 3-2 and discussed in Chapter 3. Placement limitations for the PDU are
shown in Table 2-2.
How to Position the PDU
Count the receptacles needed for each unit in the rack, notice where the PDUs
can be most conveniently placed, and decide whether to orient the PDU vertically
or horizontally.
Connecting and Routing Cables to the HP NetServer LH 4r
Figure 2-2. Three PDU Configurations
19