HP D7171A - NetServer - LPr Manual page 35

Rack cabling reference
Hide thumbs Also See for D7171A - NetServer - LPr:
Table of Contents

Advertisement

Chapter 2
Connecting and Routing Cables to the HP NetServer LH 4r
Figure 2-8. PDU 120 VAC Configuration
Figure
8 shows a UPS connected to the power grid through a captive cord with
2-
a NEMA 5-20P. The UPS has receptacles for use in the rack: two (on the right
rear) NEMA 5-20R and six NEMA 5-15R. The PDU connects to the UPS via a
detachable cord (NEMA 5-20P to an IEC 320 C20). The 120 VAC PDU has nine
NEMA 5-15R and one (at the right) IEC 320 receptacle. The fan (not required if
perforated doors--or no doors--are used front and back) plugs into the PDU using
the right-most IEC 320 receptacle.
31

Advertisement

Table of Contents
loading

Table of Contents