About This Cabling Reference; Introduction; Before You Use This Reference; Purpose Of This Document - HP D5970A - NetServer - LCII Manual

1 About This Cabling Reference

Introduction

Before You Use This Reference

This cabling reference assumes:
You have completed the rack assembly process.
You have rack-mounted the HP NetServer LPr and other components.
You are ready to cable the components in the rack.
For instructions on how to install the HP NetServer LPr in a rack, see Chapter 9
in the HP NetServer LPr Installation Guide.
NOTE
For instructions on how to assemble other components of a
network system in a rack, please find and follow the
documentation shipped with those components. Look for this
documentation first inside the rack or the separately orderable
installation kit, or use the generic rack assembly process
described in this chapter.

Purpose of This Document

This reference provides information for cabling the HP NetServer LPr, including
power consumption and current requirements. It is written for rack installers who
have installed the HP NetServer LPr in a rack and need information about how to
connect data and power cables. It includes:
Assessment of floor's flatness and strength
A review of the generic steps for building a rack installation
Site preparation information
Illustrations of electrical power components
Procedures for connecting data cables between the HP NetServer LPr and
other system components
Illustrations for installing Power Distribution Units (PDU) in the rack
1