[Perf Mon] Delete Unused Wwns; [Perf Mon] Edit Cu Monitor Mode; [Perf Mon] Edit Monitoring Sw; [Perf Mon] Edit Wwn - HP StorageWorks P9000 Reference Manual

[Perf Mon] Delete Unused WWNs

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Delete Unused WWNs,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx

[Perf Mon] Edit CU Monitor Mode

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit CU Monitor Mode,Enable,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+[LDKC:CU] = [0x00:0x00,0x00:0x01,0x00:0x02],Num. of CUs = 3
Basic information
Parameter
Enable
Detailed information
Item
LDKC:CU

[Perf Mon] Edit Monitoring SW

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit Monitoring SW,Enable 60sec,
Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
Basic information
Parameter
Enable XXsec
Disable

[Perf Mon] Edit WWN

Example
07xx,YYYY/MM/DD,HH:MM:SS.xxx, 00:00,RMI AP,uid=user-name,1,
Task Name,[Perf Mon],Edit WWN,,Normal end,
from=xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx,,Seq.=xxxxxxxxxx
+{Update Mode,HBA WWN,Change WWN Name,Change HBA WWN}
=[{Change HBA WWN,0xXXXXXXXXXXXXXXXX,,0xXXXXXXXXXXXXXXXX},
{Change WWN Name,0xXXXXXXXXXXXXXXXX,
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX,}],Num. of WWNs=2
Description
The monitored CU is enabled.
Description
The ID of the monitored CU
The logical DKC number and the CU number are separated by colons and arranged in this
order.
Description
Monitoring is enabled and the gathering interval is set as XX sec.
Monitoring is disabled.
Performance Monitor descriptions 103