Screen Control Command; Cf_Screen Command; Cf_Dzcent Command; Cf_Keystone Command - Sanyo PLC-XL50A - 2000 Lumens Manual

PLC-XL50 Expand Serial Command Functional Specifications

8.7 Screen Control Command

8.7.1

CF_SCREEN Command

Command "CF_SCREEN_%1"[CR]
Input is
Computer
%1
Input is
Video
Select screen size (Available only in the normal Power ON status)
Details When Input specified by %1 is inappropriate for selected Input, the projector
returns "101"[CR] and the command is not executed
Acceptable
Response
Unacceptable
8.7.2

CF_DZCENT Command

Command "CF_DZCENT_%1"[CR]
%1 "CENT" ---- Cancel Digital Zoom (CENT : "CENTER")
Cancel Digital Zoom
Details When image is expanded / reduced, this command reset its value to "0"
(Available only in the normal Power ON status and Input for Computer is selected)
Acceptable
Response
Unacceptable
8.7.3

CF_KEYSTONE Command

Command "CF_KEYSTONE_%1"[CR]
"UP" ------------- Correct Keystone distortion to reduce upper part of image
"FUP" ----------- Correct Keystone distortion to reduce upper part by 2 steps
%1
"DN" ------------- Correct Keystone distortion to reduce lower part of image
"FDN" ----------- Correct Keystone distortion to reduce lower part by 2 steps
"RST" ------------ Set Keystone OFF
Change Keystone distortion correction
Details
(Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
8.7.4

CF_KYSTNMODE Command

Command "CF_KYSTNMODE_%1"[CR]
"STR" --------- Set Keystone store mode to Store
%1
"RST" --------- Set Keystone store mode to Reset
Details Set Keystone store mode (Available only in the normal Power ON status)
Acceptable
Response
Unacceptable
"NORMAL" ---------------------- Select Normal
"WIDE" --------------------------- Select Wide
"TRUE" --------------------------- Select True size
"FULL" --------------------------- Select Full size
"DZOOM_UP" ------ Expand image size with Digital Zoom
"DZOOM_DN" ------ Compress image size with Digital Zoom
"NORMAL" ---------------------- Select Normal
"WIDE" --------------------------- Select Wide
"000"[CR]
"Error Code"[CR]
"201"[CR] --- When reaches the correction limit
"000"[CR]
"101"[CR] ------ when Input for Video is selected
"000"[CR]
"Error Code"[CR]
"201"[CR] ----When reaches the Keystone correction limit or when
reaches correction limit by 1 step with "FDN"/"FUP"
(command is not executed)
"000"[CR]
"Error Code"[CR]
24/51