Disassembling And Assembling; Separating Front Axle Assembly - Kubota G21LD / G21HD Workshop Manual

G21LD · G21HD, WSM

[2] DISASSEMBLING AND ASSEMBLING

(1) Separating Front Axle Assembly

Dismount Mower
1. Refer to "MOWER" section.
Battery and Bonnet
1. Turn the main switch off.
2. Remove the radiator screen (2)
3. Disconnect the negative cable (1) from the battery.
4. Disconnect the 1P connectors (4) from the head light (3).
5. Remove the wiring (5) from the bonnet.
6. Remove the bonnet stay mounting screws (7), and remove the
bonnet with the bonnet bracket (6) from the frame.
(1) Negative Cable
(2) Radiator Screen
(3) Head Light
(4) 1P Connectors
Front Cover and PTO Assembly
1. Remove the front PTO cover.
2. Remove the PTO clutch spring (4), brake spring (7) and return
spring (6).
3. Remove the belt stay (9).
4. Remove the pulley (10).
5. Remove the front PTO belts (8).
6. Remove the cotter pin and flange bolt (3).
7. Pull out the PTO brake assembly (5) and tension arm (2) with
tension pulley.
(When reassembling)
• Apply grease to the tension arm bushings and the PTO brake
bushing.
• After reassembling the PTO clutch spring, be sure to adjust the
front PTO belt tension. (See page 7-S3.)
• After reassembling the belt stay, be sure to adjust the clearance
between the belt stay and front PTO belt. (See page 7-S4.)
Clearance (L): 1.0 to 2.5 mm (0.04 to 0.10 in.)
(1) Cotter Pin
(2) Tension Arm
(3) Flange Bolt
(4) PTO Clutch Spring
(5) PTO Brake Assembly
4-S5
FRONT AXLE
W1011444
(5) Wiring
(6) Bonnet Bracket
(7) Bonnet Stay Mounting Screws
W1012605
(6) Return Spring
(7) Brake Spring
(8) Front PTO Belts
(9) Belt Stay
(10) Pulley
W1011729
KiSC issued 08, 2007 A