G21LD · G21HD, WSM
Adjusting Left and Right Cutting Height
1. Mount the mower to the machine, and place the machine on a
level ground.
2. Set the cutting height to "2" position.
3. Measure the heights (L), (R) of the blade.
4. If the difference between left tip of blade and right tip of blade
exceeds the factory specification, adjust the length (L1) of upper
lift link (1) and lower lift link (2).
(Reference)
• L1 : 350 mm (13.8 in.)
Difference (L-R)
between left tip of blade
Factory spec.
and right tip of blade (on
blades A, B and C)
(1) Upper Lift Link
(2) Lower Lift Link
Adjusting Rotation Plate
1. Park the machine on level ground, and stop the engine.
2. Dismount the mower.
3. Turn over the mower.
4. Turn the adjusting screw (3) until the rotation plate (1) and the
performance plate end (2) come into contact with each other.
(Reference)
• L : 26 mm (1.02 in.)
(1) Rotation Plate
(2) Performance Plate End
9-S6
MOWER
Less than 4 mm
0.16 in.
(a) Left
W1012173
(3) Adjusting Screw
W1012598
KiSC issued 08, 2007 A