Checking, Disassembling And Servicing; Checking And Adjusting - Kubota G21LD / G21HD Workshop Manual

G21LD · G21HD, WSM

4. CHECKING, DISASSEMBLING AND SERVICING

[1] CHECKING AND ADJUSTING

Toe-in
1. Inflate the front tires to the specified pressure.
2. Turn the front wheels straight ahead, and measure the toe-in (B-
A).
3. If the measurement is not within the factory specifications,
change the tie-rod length to adjust.
Toe-in (B-A) Factory spec.
IMPORTANT
• After adjusting the toe-in, secure the tie-rod with the lock
nut.
A : Wheel to Wheel Distance at Front
B : Wheel to Wheel Distance at Rear
Front Axle End Play
1. Jack up the front of frame.
2. Measure the clearance between the front axle (1) and adjusting
shims (2).
3. If the measurement exceeds the allowable limit, replace the
adjusting shims (2).
Factory spec.
Front axle end play
Allowable limit
(Reference)
• Thickness of adjusting shims:
1.5 mm (0.059 in.) (Part No. K1310-1512-0)
1.9 mm (0.075 in.) (Part No. K1310-1513-0)
2.3 mm (0.091 in.) (Part No. K1310-1514-0)
3.0 mm (0.118 in.) (Part No. K1310-1515-0)
(1) Front Axle
4-S4
FRONT AXLE
0 to 10 mm
0 to 0.394 in.
W1011030
0.1 to 0.4 mm
0.004 to 0.016 in.
1.0 mm
0.039 in.
(2) Adjusting Shim
W1011222
KiSC issued 08, 2007 A